User manual HUSKY HRDC-U250-061117
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual HUSKY HRDC-U250-061117. We hope that this HUSKY HRDC-U250-061117 user guide will be useful to you.
Lastmanuals help download the user guide HUSKY HRDC-U250-061117.
Manual abstract: user guide HUSKY HRDC-U250-061117
Detailed instructions for use are in the User's Guide.
[. . . ] Nozzle Selection
ULTRA 250 DESIGN INFORMATION Ultra 250 Nozzle Pitch
Minimum nozzle pitch dimensions for the Ultra 250 nozzle are provided on the right. For applications that exceed 16 drops, . [. . . ] Ultra 250 HT-U Plate Sizing Number of Manifold Drops Height 2-4 6 - 16
J
K
N
40. 00 (1. 574") 55. 1 (2. 17") 60. 00 (2. 362") 75. 1 (2. 96")
Contact Husky for more information
Please confirm all dimensions and nozzle/gating suitability with Husky prior to machining.
31
2006. 08
Nozzle Selection
Gate Detail
Contact Husky with any gate insert backup concerns.
Ultra 250 HT-U
12. 5 [0. 49]
METRIC IMPERIAL
7. 000 + 0. 005 [0. 2756 + 0. 0002]
0. 0004 A 0. 01 A
Gate Diameter < 1. 2mm (0. 047")
60
0. 005 0. 0002
A
0. 4
1. 0 [0. 039]
3. 60 [0. 142]
80
0. 8
0. 4
60 R 0. 8 [0. 03] R 0. 8 [0. 03]
0. 8
0. 8
0. 8
SR 2. 80 [0. 110]
[0. 002 + 0. 001]
0. 05 + 0. 03
S
G
3. 4 [0. 13]
G
is application specific, contact Husky prior to machining.
Gate Steel: Hardened tool steels such as 49 - 51 Rc AISI H13 / DIN 1. 2344 provide a good combination of strength and ductility. Note: These steels may not offer the desired resistance to abrasive and/or corrosive resins, fillers and/or additives.
Gate Diameter > 1. 2mm (0. 047")
60
0. 8
3. 60 [0. 142]
80
0.
0. 8
[0. 004 + 0. 001]
0. 10 + 0. 03
S
G
G
is application specific, contact Husky prior to machining.
Please confirm all dimensions and nozzle/gating suitability with Husky prior to machining.
2006. 08
32
SR TAN PT
0. 4
0. 80 [0. 031]
SR TAN PT
SR 2. 80 [0. 110]
7. 6 [0. 30]
0. 4
0. 80 [0. 031]
4
Ultra 250 HT-T
Plate Sizing - Pocket Detail
Nozzle Selection
40. 00 [1. 574]
12. 7 [0. 50]
16. 02 0. 01 [0. 631 0. 0004 R 3. 0 [0. 12] 13. 0 [0. 51]
BL 64. 66 - 164. 66 [2. 546 - 6. 483]
5. 0 x 6. 5 DP. [0. 20 x 0. 26 DP. ]
K
0. 5 x 45 [0. 02 x 45 ]
J
3. 5 [0. 14]
SL
N
20. 0 [0. 79]
L 13. 00 - 148. 8 [0. 512 - 5. 858]
10. 0 [0. 39]
R 0. 4 [0. 02]
For more than 16 drops.
Nominal dimensions shown for layout purpose only.
Actual dimensions dependent on operating temperatures.
Thermal Calculations
BL / K / L / N / SL - Refer to the plate calculator at http://www. husky. ca/hotrunners/content-316-219. html - OR Contact Husky for plate thickness and critical bore depths. Ultra 250 HT-T Plate Sizing Number of Manifold Drops Height 2-4 6 - 16
J
K
N
40. 00 (1. 574") 55. 1 (2. 17") 60. 00 (2. 362") 75. 1 (2. 96")
Contact Husky for more information
Please confirm all dimensions and nozzle/gating suitability with Husky prior to machining.
33
2006. 08
Nozzle Selection
Gate Detail
Contact Husky with any gate insert backup concerns.
Ultra 250 HT-T
12. 5 [0. 49]
METRIC IMPERIAL
7. 000 + 0. 005 [0. 2756 + 0. 0002]
0. 0004 A 0. 01 A
Gate Diameter < 1. 2mm (0. 047")
60
0. 005 0. 0002
A
0. 4
1. 0 [0. 039]
3. 60 [0. 142]
80
0. 8
0. 4
60 R 0. 8 [0. 03] R 0. 8 [0. 03]
0. 8
0. 8
0. 8
SR 2. 80 [0. 110]
[0. 002 + 0. 001]
0. 05 + 0. 03
S
G
3. 4 [0. 13]
G
is application specific, contact Husky prior to machining.
Gate Steel: Hardened tool steels such as 49 - 51 Rc AISI H13 / DIN 1. 2344 provide a good combination of strength and ductility. Note: These steels may not offer the desired resistance to abrasive and/or corrosive resins, fillers and/or additives.
Gate Diameter > 1. 2mm (0. 047")
60
0. 8
3. 60 [0. 142]
80
0.
0. 8
[0. 004 + 0. 001]
0. 10 + 0. 03
S
G
G
is application specific, contact Husky prior to machining.
Please confirm all dimensions and nozzle/gating suitability with Husky prior to machining.
2006. 08
34
SR TAN PT
0. 4
0. 80 [0. 031]
SR TAN PT
SR 2. 80 [0. 110]
7. 6 [0. 30]
0. 4
0. 80 [0. 031]
4
Ultra 250 HT-DX
Plate Sizing - Pocket Detail
Nozzle Selection
40. 00 [1. 574]
0. 5 x 45 [0. 02 x 45 ] 16. 02 0. 01 [0. 631 0. 0004] R 3. 0 [0. 12] 13. 0 [0. 51] BL 77. 16 - 177. 16 [3. 04 - 6. 98]
12. 7 [0. 50]
J
5. 0 x 6. 5 DP. [0. 20 x 0. 26 DP. ]
3. 5 [0. 14]
K N SL
20. 0 [0. 79]
R 0. 4 [0. 02]
10. 0 [0. 39]
Nominal dimensions shown for layout purpose only.
Actual dimensions dependent on operating temperatures.
Thermal Calculations
BL / K / L / N / SL - Refer to the plate calculator at http://www. husky. ca/hotrunners/content-316-219. html - OR Contact Husky for plate thickness and critical bore depths. Ultra 250 HT-DX Plate Sizing Number of Manifold Drops Height 2-4 6 - 16
L 25. 5 - 161. 3 [1. 00 - 6. 35]
For more than 16 drops.
J
K
N
40. 00 (1. 574") 55. 1 (2. 17") 60. 00 (2. 362") 75. 1 (2. 96")
Contact Husky for more information
Please confirm all dimensions and nozzle/gating suitability with Husky prior to machining.
35
2006. 08
Nozzle Selection
Gate Detail
Contact Husky with any gate insert backup concerns.
12. 5 [0. 49]
Ultra 250 HT-DX
METRIC IMPERIAL
0. 005 0. 0002
A
Gate Diameter < 1. 2mm (0. 047")
1. 30 [0. 051]
7. 000 + 0. 005
0. 01 A
3. 8 [. 15] REF SR CENTER
60
B
80
0. 8
[0. 2756 +0. 0002]
0. 0004 A
0. 4
R 0. 8 [0. 03]
0. 8
0. 4
FULL SR
[0. 002 + 0. 001]
15. 9 [0. 63] REF 20. 1 [0. 79] REF
90
0. 8
0. 05 +0. 03
S
G
7. 35 REF [. 289] INT PT
6. 00 + 0. 05 [0. 236 + . 002]
R 0. 2 [0. 08] MAX
G
is application specific, contact Husky prior to machining.
3. 8 [. 15] REF SR CENTER
Gate Steel: Hardened tool steels such as 49 - 51 Rc AISI H13 / DIN 1. 2344 provide a good combination of strength and ductility. Note: These steels may not offer the desired resistance to abrasive and/or corrosive resins, fillers and/or additives.
Gate Diameter > 1. 2mm (0. 047")
80
0. 4
0. 8
[0. 004 + 0. 001]
0. 10 + 0. 03
S
G
G
is application specific, contact Husky prior to machining.
Please confirm all dimensions and nozzle/gating suitability with Husky prior to machining.
2006. 08
36
SR TAN PT
0. 4
0. 80 [0. 031]
SR TAN PT
FULL SR
0. 4
0. 80 [0. 031]
Ultra 250 HT-TX
Plate Sizing - Pocket Detail
Nozzle Selection
40. 00 [1. 574]
0. 5 x 45 [0. 02 x 45 ] 16. 02 0. 01 [0. 631 0. 0004] R 3. 0 [0. 12] 13. 0 [0. 51] BL 77. 16 - 177. 16 [3. 04 - 6. 98] R 0. 4 [0. 02] L 25. 5 - 161. 3 [1. 00 - 6. 35]
12. 7 [0. 50]
J
5. 0 x 6. 5 DP. [0. 20 x 0. 26 DP. ]
3. 5 [0. 14]
K N SL
20. 0 [0. 79]
10. 0 [0. 39]
For more than 16 drops.
Nominal dimensions shown for layout purpose only.
Actual dimensions dependent on operating temperatures.
Thermal Calculations
BL / K / L / N / SL - Refer to the plate calculator at http://www. husky. ca/hotrunners/content-316-219. html - OR Contact Husky for plate thickness and critical bore depths. Ultra 250 HT-TX Plate Sizing Number of Manifold Drops Height 2-4 6 - 16
J
K
N
40. 00 (1. 574") 55. 1 (2. 17") 60. 00 (2. 362") 75. 1 (2. 96")
Contact Husky for more information
Please confirm all dimensions and nozzle/gating suitability with Husky prior to machining.
37
2006. 08
Nozzle Selection
Gate Detail
Contact Husky with any gate insert backup concerns.
12. 5 [0. 49]
Ultra 250 HT-TX
METRIC IMPERIAL
0. 005 0. 0002
A
Gate Diameter < 1. 2mm (0. 047")
1. 30 [0. 051]
0. 01 A
3. 8 [. 15] REF SR CENTER
7. 000 + 0. 005 [0. 2756 +0. 0002]
0. 0004 A
60
B
80
0. 8
0. 4
R 0. 8 [0. 03]
0. 8
4 0.
FULL SR
[0. 002 + 0. 001]
15. 9 [0. 63] REF 20. 1 [0. 79] REF
90
0. 8
0. 05 +0. 03
S
G
7. 35 REF [. 289] INT PT
6. 00 + 0. 05 [0. 236 + . 002]
R 0. 2 [0. 08] MAX
G
is application specific, contact Husky prior to machining.
3. 8 [. 15] REF SR CENTER
Gate Steel: Hardened tool steels such as 49 - 51 Rc AISI H13 / DIN 1. 2344 provide a good combination of strength and ductility. [. . . ] 4
0. 8
SR 2. 80 [0. 110]
0. 8
[0. 002 + 0. 001]
20. 1 [0. 79]
15. 9 [0. 63]
0. 05 + 0. 03
0. 8
S
G
G
is application specific, contact Husky prior to machining.
0. 8
R 3. 0 [0. 12]
Gate Steel: Hardened tool steels such as 49 - 51 Rc AISI H13 / DIN 1. 2344 provide a good combination of strength and ductility. Note: These steels may not offer the desired resistance to abrasive and/or corrosive resins, fillers and/or additives.
Gate Diameter > 1. 2mm (0. 047")
60
0. 8
3. 60 [0. 142]
80
0.
0. 8
[0. 004 + 0. 001]
0. 10 + 0. 03
S
G
G
is application specific, contact Husky prior to machining.
Please confirm all dimensions and nozzle/gating suitability with Husky prior to machining.
2006. 08
42
SR TAN PT
0. 4
0. 80 [0. 031]
SR TAN PT
SR 2. 80 [0. 110]
0. 4
0. 80 [0. 031]
R 0. 8 [0. 03]
4 [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE HUSKY HRDC-U250-061117
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets...
In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual HUSKY HRDC-U250-061117 will begin.
