User manual HUSKY HU80520

[. . . ] OPERATOR'S MANUAL GASOLINE PRESSURE WASHER HU80520 Your pressure washer has been engineered and manufactured to Husky's high standard for dependability, ease of operation, and operator safety. When properly cared for, it will give you years of rugged, trouble-free performance. WARNING: To reduce the risk of injury, the user must read and understand the operator's manual before using this product. Thank you for your purchase. SAVE THIS MANUAL FOR FUTURE REFERENCE TABLE OF CONTENTS Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Important Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] 6 SPRAY WAND CONNECTING HIGH PRESSURE HOSE TO SPRAY WAND ASSEMBLY See Figure 8. Screw the collar on the high pressure hose into the spray wand's inlet coupler by turning the hose collar clockwise. Pull on the hose to be certain it is properly secured. CONNECTOR GROOVED GRIPPING SURFACE SPRAY WAND EXTENSION Fig. 7 COLLAR HIGH PRESSURE HOSE INLET COUPLER Fig. 8 11 ASSEMBLY CONNECTING THE HIGH PRESSURE HOSE TO THE PUMP See Figure 9. After the high pressure hose has been uncoiled and attached to the spray wand: Align the collar on the threaded nipple on the pump. Insert the nozzle on the end of the high pressure hose collar into the threaded nipple. Turn the collar clockwise to tighten the hose securely to the pump. Pull on the hose to be certain it is properly secured. COLLAR CONNECTING THE GARDEN HOSE TO THE PRESSURE WASHER See Figure 10. The water supply must come from a water main. NEVER use hot water or water from pools, lakes, etc. Before connecting the garden hose to the pressure washer: Run water through the hose for 30 seconds to clean any debris from the hose. Inspect the screen in the water intake. If the screen is damaged, do not use the machine until the screen has been replaced. If the screen is dirty, clean it before connecting the garden hose to the machine. To connect the garden hose to the machine: Uncoil the garden hose. NOTE: There must be a minimum of 10 feet of unrestricted hose between the pressure washer intake and the hose faucet or shut off valve (such as a "Y" shut off connector). With the hose faucet turned completely off, attach the end of the garden hose to the water intake. Tighten by hand. THREADED NIPPLE Fig. 9 WATER INTAKE GARDEN HOSE SCREEN Fig. 10 OPERATION WARNING: Do not allow familiarity with tools to make you careless. [. . . ] All warranty work must be performed by an authorized Techtronic Industries North America, Inc. This warranty does not cover any product that has been subject to misuse, neglect, negligence, or accident, or that is used for rental or commercial purposes, or that has been operated in any way contrary to the operating instructions as specified in the Techtronic Industries North America, Inc. This warranty does not apply to any damage to the product that is the result of improper maintenance or to any product that has been altered or modified so as to adversely affect the products operation, performance or durability or that has been altered or modified so as to change its intended use. The warranty does not extend to repairs made necessary by normal wear or by the use of parts or accessories which are either incompatible with the HUSKY® brand pressure washer or adversely affect its operation, performance or durability. [. . . ]