User manual HUSQVARNA 128LDX

[. . . ] EN (2-24) FR (25-47) ES (48-70) SYMBOL EXPLANATION Symbols WARNING: Clearing saws, brushcutters and trimmers can be dangerous!Careless or incorrect use can result in serious or fatal injury to the operator or others. Please read the operator’s manual carefully and make sure you understand the instructions before using the machine. Always wear: S A protective helmet where there is a risk of falling objects S Hearing protection S Approved eye protection Max. [. . . ] Be aware of the fire hazard, especially when working near flammable substances and/or vapors. S Clean the area around the fuel cap. Contamination in the tank can cause operating problems. S Ensure that the fuel is well mixed by shaking the container before filling the tank. Min. 2 7/15/10 English--- 12 STARTING AND STOPPING Check before starting Starting and stopping WARNING: When the engine is started with the choke in either the choke or start throttle positions the cutting attachment will start to rotate immediately. WARNING: S Never start the machine indoors. Exhaust fumes can be dangerous if inhaled. S Observe your surroundings and make sure that there is no risk of people or animals coming into contact with the cutting equipment. S Place the machine on the ground, ensure the cutting attachment is clear of twigs and stones. Hold the body of the machine on the ground using your left hand (CAUTION!Then grip the starter handle with your right hand and pull the starter cord. The complete clutch, clutch cover, and shaft must be fitted before the machine is started, otherwise parts could come loose and cause personal injury. Always move the machine away from the refueling area before starting. Ensure the cutting attachment cannot come into contact with any object. Make sure no unauthorized persons are in the working area, otherwise there is a risk of serious personal injury. The safety distance is 15 meters. Cold engine Primer bulb: Press the primer bulb 10 times until fuel begins to fill the bulb. The primer bulb need not be completely filled. S Check that the trimmer head and trimmer guard are not damaged or cracked. Replace the trimmer head or trimmer guard if they have been exposed to impact or are cracked. Choke: Move the blue engine choke lever over to the closed position. Starting Hold the body of the machine on the ground using your left hand (CAUTION!Firmly grip the starter rope handle with your right hand. Slowly pull out the cord until you feel some resistance (the starter pawls grip); then quickly and powerfully pull the cord. Never wrap the starter cord around your hand. Repeat pulling the cord until the engine attempts to start. Move the blue engine choke lever to the ½ position. Move the blue engine choke lever to the opened position. English--- 13 S Never use the machine without a guard nor with a defective guard. 115299326 Rev. [. . . ] Check that the bevel gear is filled threequarters full with lubricant. Check the fuel filter from contamination and the fuel hose from cracks or other defects. Check the clutch, clutch springs and the clutch drum for wear. Replace if necessary by an autorized service workshop. [. . . ]