User manual HUSQVARNA 323 R

[. . . ] Operator's manual (EPA II) 323R 325RX-SERIES 325RXT-SERIES 325RDX-SERIES Please read these instructions carefully and make sure you understand them before using the machine. English SYMBOL EXPLANATION Symbols WARNING!Clearing saws, brushcutters and trimmers can be dangerous!Careless or incorrect use can result in serious or fatal injury to the operator or others. Read through the Operator‘s Manual carefully and understand the content before using the machine. [. . . ] • Unscrew the bracket components from the handlebar bracket. • Position the handlebars as shown. Fit the bracket components and tighten the handle lightly. • Put on the harness and hang the machine in the suspension hook. Now finely adjust so that the machine gives a comfortable working position when it‘s attached to the harness. Tighten the handle. Transport position, handlebars (325RX, 325RXT, 325RDX) • The handlebars can easily be turned to fit along the shaft for easy transportation and storage. Turn the handles clockwise so that the throttle comes against the engine. • Thereafter fold the handlebars around the shaft. • Attach the transport guard. English – 17 ASSEMBLY Assembly of the blade and trimmer head It is extremely important that the disc drive’s/support flange’s guide engages correctly in the cutting equipment’s centre hole when assembling the cutting equipment. Cutting equipment assembled incorrectly can result in serious and/or fatal personal injury. Assembling the blade guard and clearing blade • Remove the mounting plate (H). Fit the adapter (I) and bracket (J) with the two screws (K) as shown. Fit the blade guard (A) to the adapter using the 4 screws (L) as shown. • Fit the drive disc (B) on the output axle. • Turn the blade axle until one of the holes in the drive disc aligns with the hole in the gear housing. • Insert the locking pin (C) in the hole so that the axle is locked. • Place the blade (D) and support flange (F) on the output axle. The tightening torque of the nut is 35-50 Nm (3. 5 - 5 kpm). Hold the handle of the spanner as close to the blade guard as possible. The nut is tightened when the spanner is turned against the direction of rotation (lefthand thread). • When slacking off and tightening the saw blade nut, the hands may be injured by the blade teeth. Always hold your hand protected by the blade guard. This is facilitated by the use of a long box spanner. [. . . ] The table indicates the highest and lowest values. English – 29 TECHNICAL DATA Approved accessories 323R Centre hole in blades Ø 25, 4 mm Threaded blade axle M10 Grass blade Saw blade Plastic knives Trimmer head Type Cutting attachment guard Art No. 503 93 42-02 503 93 42-02 537 02 21-01 503 93 42-02 503 93 42-02 / 503 97 71-01 503 93 42-02 / 503 97 71-01 503 93 42-02 / 503 97 71-01 503 93 42-02 / 503 97 71-01 503 93 42-02 / 503 97 71-01 - Support cup Grass 255-4 1" (∅ 255 4-teeth) Grass 255-8 1" (∅ 250 8-teeth) Maxi X 200-26 1" (∅ 200 26-teeth) Tricut ∅ 300 Trimmy Fix Trimmy H II 1" Trimmy Hit Trimmy Hit Pro Superauto II 1" Fixed Approved accessories 325RX, 325RXT, 325RDX Centre hole in blades Ø 25, 4 mm Threaded blade axle M10 Grass blade Type Cutting attachment guard Ref No. Saw blade Plastic knives Trimmer head Support cup Grass 255-4 1" (∅ 255 4-teeth) Grass 255-8 1" (∅ 250 8-teeth) Multi 255-3 1" (∅ 255 3-teeth) Maxi X 200-26 1" (∅ 200 26-teeth) Tricut ∅ 300 Trimmy Fix Trimmy H II 1" Trimmy Hit Trimmy Hit Pro Superauto II 1" Fixed 503 93 42-02 503 93 42-02 503 93 42-02 537 02 21-01 503 93 42-02 503 93 42-02 / 503 97 71-01 503 93 42-02 / 503 97 71-01 503 93 42-02 / 503 97 71-01 503 93 42-02 / 503 97 71-01 503 93 42-02 / 503 97 71-01 - 30 – English EMISSION CONTROL WARRANTY STATEMENT YOUR WARRANTY RIGHTS AND OBLIGATIONS The EPA (The US Environmental Protection Agency), Environment Canada and Husqvarna Forest & Garden are pleased to explain the emissions control system warranty on your 2001 and later small nonroad engine. and Canada, new small nonroad engines must be designed, built and equipped to meet the federal stringent anti-smog standards. Husqvarna Forest & Garden must warrant the emission control system on your small nonroad engine for the periods of time listed below provided there has been no abuse, neglect or improper maintenance of your unit. [. . . ]