User manual HUSQVARNA 954328030

[. . . ] 650CRT Owner's Manual SAFETY RULES SAFE OPERATION PRACTICES FOR WALK-BEHIND POWERED ROTARY TILLERS TRAINING • Read the Owner’s Manual carefully. Be thoroughly familiar with the controls and the proper use of the equipment. Know how to stop the unit and disengage the controls quickly. Never allow children to operate the equipment. [. . . ] Clean muffler area of all grass, dirt, and debris. Do not touch hot muffler or cylinder fins as contact may cause burns. ENGINE LUBRICATION Use only high quality detergent oil rated with API service classification SF-SJ. Select the oil’s SAE viscosity grade according to your expected temperature. SAE VISCOSITY GRADES SAE 30 10W-30 / 5W-30 °F °C -20° -30° -20° 0° -10° 30° 40° 4° 10° 60° 20° 80° 30° 100° 40° OIL DRAIN PLUG OIL LEVEL OIL FILLER PLUG TEMPERATURE RANGE ANTICIPATED BEFORE NEXT OIL CHANGE FIG. 16 NOTE: Although multi-viscosity oils (5W-30, 10W-30, etc. ) improve starting in cold weather, these multi-viscosity oils will result in increased oil consumption when used above 40°F (4°C). Check your engine oil level more frequently to avoid possible engine damage from running low on oil. Change the oil after every 25 hours of operation or at least once a year if the tiller is not used for 25 hours in one year. Check the crankcase oil level before starting the engine and after each five (5) hours of continuous use. Tighten oil filler plug securely each time you check the oil level. 16 and 17) Determine temperature range expected before oil change. All oil must meet API service classification SF-SJ. • Be sure tiller is on level surface. • Oil will drain more freely when warm. • Use a funnel to prevent oil spill on tiller, and catch oil in a suitable container. For easier removal of plug use 7/16 12 Pt. socket with extension. ) • Tip tiller forward to drain oil. • After oil has drained completely, replace oil drain plug and tighten securely. Be careful not to allow dirt to enter the engine. See “CHECK ENGINE OIL LEVEL” in the Operation section of this manual. FIG. 18) Your engine will not run properly using a dirty air filter. Clean the foam pre-cleaner after every 25 hours of operation or every season. Service paper cartridge every 100 hours of operation or every season, whichever occurs first. Service air cleaner more often under dusty conditions. [. . . ] All trimmers, brushcutters, clearing saws, hovering trimmers, stick edgers, backpack blowers, hand held blowers, hedge trimmers, power-assist collection systems used for commercial, institutional, professional or income producing purposes or use. Batteries have a one-year prorated limited warranty with 100% replacement during the first 6 months. 90 Day Warranty: Automatic Mower, Chain saws, power cutters, stump grinders, pole saws, pole pruners, snow throwers, model series 580 & 600 walk-behind mowers and commercial turf equipment or any Husqvarna product used for commercial, institutional, professional, or income producing purposes or use except as otherwise provided herein. Husqvarna Safety Apparel carries a 90-day warranty from the date of the customer’s original purchase for defects in material and workmanship. [. . . ]