User manual HUSQVARNA 966976301

[. . . ] This includes the care for the machine as well as personal safety. This machine is only as dangerous as the person who is operating it. Don't allow yourself to become careless after you have gotten acquainted with the machine and its operation. DON'T EXPOSE YOURSELF OR OTHERS TO DANGER. [. . . ] 7 Switch and Full Choke Positions Fig. 8 Yellow Compression Relief Valve 7 WARNING: When pulling starter rope, the rope can unexpectedly jerk back toward engine causing serious injury. To avoid this risk, carefully follow these instructions: Move rocker switch to "I" position. Pull rope out slowly until you feel drag. Without allowing the rope to retract, continue pulling rope with one rapid full arm stroke. Return rope slowly to original position. Lower front of unit until tines begin to dig into ground to start filling. Unit will tend to walk forward at this point and must be firmly held back to allow tines to till. If adjustments to tilling depth must be made, proceed as follows: a. Shut engine off by moving switch to “O” position. DRAG STAKE Fig. 9 Starter Cord Handle Location 8 b. 13 SET SCREW FILLER SCREW KEEP YOUR AIR FILTER CLEAN!In a new machine, your filter should be clean. However, after you have used this machine for a while, your filter will accumulate dirt and dust. Check the condition of your filter frequently. A dirty or clogged filter element will restrict the air flow to the carburetor, thus changing the air-fuel mix. This will create symptoms often mistaken for the carburetor being out of proper adjustment. To clean the filter, follow these steps: 1. Loosen and remove two screws from cover. Remove COVER, SCREEN, and FOAM FILTER from MAIN BODY. Inspect SCREEN(S) and FOAM FILTER for discoloration or dirt accumulation. 12 9 TO CLEAN SCREEN a) Wash SCREEN in water and detergent solution. [. . . ] All 300 series trimmers, brushcutters, clearing saws, hovering trimmers, stick edgers, backpack blowers, hand held blowers, hedge trimmers, power-assist collection systems for commercial, institutional, professional or income producing purposes or use. 1 Year Conditional Component Warranty: Chain saw crankshafts for commercial/professional use (parts and labor). Saw must be operated with Husqvarna XP 2 cycle oil. 90 Day Commercial Warranty: Automatic mower, chain saws, 100 series trimmers, power cutters, stump grinders, pole saws, pole pruners, snow throwers, model series 580 & 600 walk-behind mowers, or any Husqvarna product used for commercial, institutional, professional, municipality or income producing purposes or use except as otherwise provided herein. Batteries: 1 year prorated limited warranty with 100% replacement during the first 6 months. [. . . ]