User manual HUSQVARNA DS 150

[. . . ] Also read the operating manual enclosed with the drill motor and check that its performance is compatible with the stand. You must use approved personal protective equipment whenever you use the machine. Personal protective equipment cannot eliminate the risk of injury but it will reduce the degree of injury if an accident does happen. Always use common sense It is not possible to cover every conceivable situation you can face. [. . . ] Wear protective gloves to avoid body injuries. Never use the machine if you are tired, if you have drunk alcohol, or if you are taking medication that could affect your vision, your judgement or your co-ordination. Never allow anyone else to use the machine without first ensuring that they have understood the contents of the operator's manual. Be careful as clothing, long hair, and jewellery can get caught in moving parts. Never work alone, always ensure there is another person close at hand. Apart from being able to receive help to assemble the machine, you can also get help if an accident should occur. It is our wish that you will be satisfied with your product and that it will be your companion for a long time. Think of this operators manual as a valuable document. By following its content (using, service, maintenance etc) the life span and the second-hand value of the machine can be extended. If you will sell this machine, make sure that the buyer will get the operators manual. A purchase of one of our products gives you access to professional help with repairs and services. If the retailer who sells your machine is not one of our authorised dealers, ask him for the address of your nearest service workshop. husqvarna Construction Products has a policy of continuous product development. Husqvarna reserves the right to modify the design and appearance of products without prior notice and without further obligation introduce design modifications. The base plate is made of aluminium and is therefore very light weight. The drill stand is equipped with a quick connection plate for the drillmotor. Feed lever can be used to adjust base plate leveling screws and set desired column tilt. The base plate is made of aluminium and is therefore very light weight. Feed lever can be used to loosen/tighten drill motor clamping, to adjust base plate leveling screws and set desired column tilt. Fit the wheel set in the mount on the backside of the bottom plate and tighten the screws. When drilling roofs, only expander or anchor suitable for surfaces exposed to tensile forces should be used. Use only expander or anchor which is approved for current application. [. . . ] This is so that the operators are not exposed to great risks. 1 2 3 4 5 6 Check that nuts and screws are tight. Check that the feed crank can be moved without resistance. Check that the gearing moves easily and does not cause any noise. [. . . ]