User manual HUSQVARNA EDGER ATTACHMENT

[. . . ] The operator of the machine must ensure that no persons or animals comes within a 15 metre radius while working. Husqvarna AB has a policy of continuous product development and therefore reserves the right to modify the design and appearance of products without prior notice. Read through the Operator`s manual carefully and understand the content before using the machine. These instructions supplement the instructions that were included with the machine. [. . . ] â· Ensure no one comes closer than 15 metres when working. Never allow anyone else to use the machine without first ensuring that they have understood the contents of the Operator's Manual. To ensure that people, animals or other things cannot affect your control of the machine. â· To ensure that the above mentioned do not come into contact with the cutting equipment or objects that can be thrown by the cutting equipment. Never use a machine without the possibility of calling for help in the event of an accident. Safety instructions before starting work Remove any objects, such as stones, broken glass, nails, steel wire, string, etc. That can be thrown or can wrap around the blade or blade guard. â· Keep others at a safe distance. Children, animals, onlookers and helpers should stand outside of the safety zone of 15 m (50 feet). Stop the machine immediately if any one should approach. â· Check the entire machine before starting work. Check for fuel leakage and that all safety guards and covers are complete and fastened securely. For example, thick fog, heavy rain, strong winds or extreme cold, etc. To work in bad weather conditions is tiring and can create dangerous circumstances, e. Ensure the blade guard is mounted and not damaged. Make sure you can walk and stand safely. Look out for any obstacles with unexpected movement (roots, stones, branches, pits, ditches, etc. Take great care when working on sloping ground. The engine should be switched off before moving. Never put the machine down with the engine running unless you have good sight of it. Safety instructions while working â· Always ensure you have a safe and firm foothold. Safety instructions after completing work â· Ensure the blade has stopped before cleaning, carrying out repairs or an inspection. [. . . ] Turn the axle while inserting it so that it correctly engages in the clutch. replace the angle gear on the drive axle shaft and tighten the two screws. Check the guard for damage and ensure that it is not cracked. The cutting depth should be adjusted before starting work. [. . . ]