User manual HUSQVARNA HELTH125C

[. . . ] 5 Driving and Transport on Public Roads. . . . . . . . . . . . . . . . . . . . . . . 5 Operating. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Good Service. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Symbols and Decals. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] If you squeeze both levers the mower will stop. 8011-482 Gear shift lever 1 4 2 3 8011-482 1. Handle Handle with bail in neutral position Husqvarna-25 operation Reverse Depress one operator presence lever and shift transmission to the reverse gear. Grip motion control levers before shifting gear. WARNING!Do not drive up or down hills with slopes greater than 10 degrees. Do not drive across slopes. 8011-482 Gear shift lever Operating on hills To operate on slopes is a dangerous mowing job. Read the Safety Instructions section “Driving on Slopes”. • The slowest speed possible should be used before starting up or down hills. • Avoid stopping or changing speed on hills. • Make all turns slowly. 26 - Husqvarna operation Mowing Tips • • • • • • Observe and mark rocks and other fixed objects in order to avoid collisions. Properly level the cutting deck for best mowing performance. The blades should be parallel to the ground or slightly tipped down in the front. Avoid sudden directional changes. • • • • • 8011-639-01 Clean mower deck after each use Husqvarna-27 operation Stopping Emergency stop Release both hands from the operate presence lever handles. When both operator presence levers return to their outer position, the engine will quit and the mower will stop. or Pull both drive levers firmly against handle grips and hold them securely in place. Use thumbs to lift the neutral bail up into the neutral slot. Stop engine by pulling throttle control back and then shut off the key switch. Normal operating stop • Pull both drive levers (traction levers) firmly toward the handle grips to stop forward motion. • Use thumbs to lift neutral bail into the neutral slots. • Move the throttle control to the slow position. • Move blade engagement control to the off position. • Move shift lever to the neutral position. Stopping the Engine If the engine has been worked hard, allow it to idle a minute in order to attain normal operating temperature before stopping it. [. . . ] All 300 series trimmers, brushcutters, clearing saws, hovering trimmers, stick edgers, backpack blowers, hand held blowers, hedge trimmers, power-assist collection systems for commercial, institutional, professional or income producing purposes or use. 1 Year Conditional Component Warranty: Chain saw crankshafts for commercial/professional use (parts and labor). Saw must be operated with Husqvarna XP 2 cycle oil. 90 Day Commercial Warranty: Automatic mower, chain saws, 100 series trimmers, power cutters, stump grinders, pole saws, pole pruners, snow throwers, model series 580 & 600 walk-behind mowers, or any Husqvarna product used for commercial, institutional, professional, municipality or income producing purposes or use except as otherwise provided herein. Batteries: 1 year prorated limited warranty with 100% replacement during the first 6 months. [. . . ]