Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual HUSQVARNA J-HANDLE. We hope that this HUSQVARNA J-HANDLE user guide will be useful to you.
Lastmanuals help download the user guide HUSQVARNA J-HANDLE.
Detailed instructions for use are in the User's Guide.
[. . . ] Saw blades must not be fitted on a machine equipped with a J-handle. Read through the Operator`s Manual carefully and understand the content before using the machine. These instructions supplement the instructions that were included with the machine. IMPORTANT INFORMATION The section describes how through correct maintenance and through using the right type of cutting equipment you can reduce the machine`s tendency to kickback, obtain maximum clearing capacity and increase the service life of the cutting equipment. [. . . ] It is used to protect the blade from hitting the ground. Reduce the risk of material wrapping around the blade by following these instructions: a) Always work at full throttle. B) Avoid the previously cut material during the return stroke. Stop the engine, loosen the harness and place the machine on the ground before you start to collect the cut material. Sometimes grass can collect in the spray guard and cutting head. Neither the user of the tool or anyone else may attempt to remove the cut material while the engine is running or with the blade rotating as this can result in serious injury. Stop the engine and blade before you remove material that has wound around the blade as otherwise there is a risk of injury. Can be thrown up into the eyes causing blindness or serious injury. keep unauthorised persons at a distance. Children, animals, onlookers and helpers should be kept outside the safety zone of 15 m. Stop the machine immediately if anyone approaches. Cutting equipment assembled incorrectly can result in serious and/or fatal personal injury. WARNING Only grass blades or trimmer heads/ plastic blades may be used when the Jhandle is fitted. Clearing blades must never be used with the J-handle. Do not attach any blade to the unit without proper installation of all required parts. Failure to use the proper parts can cause the blade to fly off and seriously injure the operator and/or bystanders. Under no circumstances may the cutting equipment be used without an approved guard fitted. see the chapter "Technical data". [. . . ] Ensure the locking nut has not lost its captive force. The nut lock should have a locking force of at least 1. Check that the guard is not damaged or cracked. Check that the trimmer head and spray guard are not damaged or cracked. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE HUSQVARNA J-HANDLE
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual HUSQVARNA J-HANDLE will begin.
