Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual HUSQVARNA J-HANDLE SET 223 L. We hope that this HUSQVARNA J-HANDLE SET 223 L user guide will be useful to you.
Lastmanuals help download the user guide HUSQVARNA J-HANDLE SET 223 L.
Manual abstract: user guide HUSQVARNA J-HANDLE SET 223 L
Detailed instructions for use are in the User's Guide.
[. . . ] The section describes how through correct maintenance and through using the right type of cutting equipment you can reduce the machine`s tendency to kickback, obtain maximum clearing capacity and increase the service life of the cutting equipment. Only use the cutting and guard equipment we recommend!Keep the blade's teeth well and correctly sharpened!Follow our instructions and use the recommended filing gauge. [. . . ] Sometimes grass can collect in the spray guard and cutting head. Neither the user of the tool or anyone else may attempt to remove the cut material while the engine is running or with the blade rotating as this can result in serious injury. Stop the engine and blade before you remove material that has wound around the blade as otherwise there is a risk of injury. Can be thrown up into the eyes causing blindness or serious injury. keep unauthorised persons at a distance. Children, animals, onlookers and helpers should be kept outside the safety zone of 15 m. Stop the machine immediately if anyone approaches. WARNING Only grass blades or trimmer heads/ plastic blades may be used when the Jhandle is fitted. Clearing blades must never be used with the J-handle. Cutting equipment assembled incorrectly can result in serious and/or fatal personal injury. Note that the loop handle must be fitted between the arrows on the shaft. Attach the J-handle to the loop handle using the three screws, as shown. Under no circumstances may the cutting equipment be used without an approved guard fitted. see the chapter "Technical data". If the wrong guard or a defective guard is fitted this can cause serious personal injury. Do not attach any blade to the unit without proper installation of all required parts. Failure to use the proper parts can cause the blade to fly off and seriously injure the operator and/or bystanders. Now adjust the trimmer to give a comfortable working position. [. . . ] Check that the support flange is not cracked due to fatigue or due to being tightened too much. Ensure the locking nut has not lost its captive force. The nut lock should have a locking force of at least 1. Check that the guard is not damaged or cracked. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE HUSQVARNA J-HANDLE SET 223 L
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual HUSQVARNA J-HANDLE SET 223 L will begin.
