User manual HUSQVARNA LB 48V

[. . . ] Operator’s manual Manual de instrucciones Instruções para o uso Istruzioni per l’uso LC 48 LC 48V LC 48VE LB 48V LB 48 GB (2-17) ES (18-34) PT (35-51) IT (52-68) Please read the operator’s manual carefully and make sure you understand the instructions before using the machine. The machine can be a dangerous tool if used incorrectly or carelessly, which can cause serious or fatal injury to the operator or others. Please read the operator’s manual carefully and make sure you understand the instructions before using the machine. Never use the machine if persons, especially children or pets, are in the immediate vicinity. [. . . ] Avoid all usage which you consider to be beyond your capability ! general • • • WARNING!Make sure that your hands and feet do not come near the cutting attachment when the engine is running. Do not use the lawn mower on very steep slopes. The lawn mower should not be used on inclines greater than 30 degrees. On sloping ground you should work along the slope. It is much easier to work along a slope than it is to work up and down it. Should be removed from the lawn before you start to mow. Never lift up the lawn mower or carry it around when the engine is running. If you must lift the lawn mower, first switch off the engine and disconnect the ignition lead from the spark plug. Make sure the cutter does not hit foreign objects such as stones, roots or the like. This can make the cutter dull and bend the engine shaft. A bent axle gives imbalance and heavy vibration, which results in a great risk of the cutter becoming loose. If any foreign object is hit or if vibrations occur stop the machine immediately. Disconnect the HT lead from the spark plug. Never mow more than 1/3 of the length of the grass. This especially applies during dry periods. mow first with the cutting height set high. Then check the result and lower to an appropriate height. If the grass is really long, drive slowly and mow twice if necessary. Basic safety rules • Look around you: - To ensure that people, animals or other things cannot affect your control of the machine. - To make sure that none of the above might come into contact with the cutting equipment. [. . . ] The oil filler cap must be completely screwed down to give a correct picture of the oil level. If the oil level is low, fill using engine oil up to the upper level on the dipstick. Max 24 h Cleaning cutting cover • Connect a water hose to the cutting cover connection. e OV ILL RF T NO DO ION UT CA FU LL • Screw on the oil filler cap. [. . . ]