User manual HUSQVARNA LC53 E

[. . . ] Please read the operator's manual carefully and make sure you understand the instructions before using the machine. 0404, SMP Svensk Maskinprovning AB, Fyrisborgsgatan 3, SE-754 50 Uppsala, Sverige, har utfärdat rapporter om bedömning av överensstämmelse enligt bilaga VI till RÅDETS DIREKTIV av den 8 maj 2000 angående emissioner av buller till omgivningen 2000/14/EG. The machine can be a dangerous tool if used incorrectly or carelessly, which can cause serious or fatal injury to the operator or others. Please read the operator's manual carefully and make sure you understand the instructions before using the machine. [. . . ] If you get into a situation where you feel unsure about how to progress, stop and seek expert advice. contact your dealer , service agent or an experienced lawn mower user. Avoid all usage which you consider to be beyond your capability WARNING!Make sure that your hands and feet do not come near the cutting attachment when the engine is running. Do not use the lawn mower on very steep slopes. The lawn mower should not be used on inclines greater than 30 degrees. On sloping ground you should work along the slope. It is much easier to work along a slope than it is to work up and down it. Should be removed from the lawn before you start to mow. Never lift up the lawn mower or carry it around when the engine is running. If you must lift the lawn mower, first switch off the engine and disconnect the ignition lead from the spark plug. Make sure the cutter does not hit foreign objects such as stones, roots or the like. This can make the cutter dull and bend the engine shaft. A bent axle gives imbalance and heavy vibration, which results in a great risk of the cutter becoming loose. Never mow more than 1/3 of the length of the grass. This especially applies during dry periods. mow first with the cutting height set high. Then check the result and lower to an appropriate height. If the grass is really long, drive slowly and mow twice if necessary. - To ensure that people, animals or other things cannot affect your control of the machine. - To make sure that none of the above might come into contact with the cutting equipment. Should be removed from the lawn before you start to mow. [. . . ] Check the oil level with the dipstick on the oil filler cap. The oil filler cap must be completely screwed down to give a correct picture of the oil level. If the oil level is low, fill using engine oil up to the upper level on the dipstick. Ensure the wheels and wheel axles are clean and free from leaves, grass, etc. [. . . ]