User manual HUSQVARNA LR110

[. . . ] Never mow while people, especially children, or pets are nearby. Keep in mind that the operator or user is responsible for accidents or hazards occurring to other people or their property. Such instruction should emphasize: - the need for care and concentration when working with ride-on machines; - control of a ride-on machine sliding on a slope will not be regained by the application of the brake. The main reasons for loss of control are: a) insufficient wheel grip; b) being driven too fast; c) inadequate braking; d) the type of machine is unsuitable for its task; e) lack of awareness of the effect of ground conditions, especially slopes; f) incorrect hitching and load distribution. [. . . ] CAUTION: Always disconnect spark plug wire and place wire where it cannot contact spark plug in order to prevent accidental starting when setting up, transporting, adjusting or making repairs. These symbols may appear on your tractor or in the literature supplied with the product. These symbols may appear on your tractor or in the literature supplied with the product. Mutter Bag of parts (contents not shown full size) · Remove box of parts · NOTE: If battery is put into service after month and year indicated on label, charge battery for minimum of one hour at 6-10 amps. WARNING: Before installing battery remove metal bracelets, wrist watch bands, rings, etc. Touching these items to battery could result in burns. WARNING: Positive terminal must be connected first to prevent sparks from accidental grounding. WARNING: Keep battery box door closed when not used to inspect terminals. Fit the seat to the seat pan as shown in the diagram. Adjust the seat to give you a comfortable working position. Make sure that the front wheels point straight ahead and that the steering wheel bar points across the tractor. Start engine and move throttle control to slow position. Drive tractor forward for approximately five feet then backwards for five feet. Repeat this driving procedure three times. Your tractor is now ready for normal operation. Move the throttle lever half way between start and fast. The motion control lever can be moved steplessly between S and F to ensure the required speed. NOTE: Always operate engine at full engine rpm when cutting grass to assure better performance and discharge of material. Observe height of cut and readjust as needed, with mower height adjustment knob. Use runner on right side as a guide, blade cuts one inch outside the runner. Drive tractor so that the grass is discharged onto side that has already been cut. NOTE: Wet grass may plug mower and leave a trail of grass clumps. [. . . ] Measure distance from ground line to lower flange of deck at right front and right rear (dim. Raise or lower rear of mower housing by adjusting right rear lift link. To raise rear of mower housing, loosen upper trunnion nut and tighten lower trunnion nut. To lower rear of mower housing, loosen lower trunnion nut and tighten upper trunnion nut. [. . . ]