User manual HUSQVARNA MASTER 46

[. . . ] Operator's Manual Read the operator's manual carefully and make sure that you understand the contents before using the lawnmower. Read operating instructions carefully before using the mower. The manufacturer reserves the right to carry out product modifications without further notice. Guarantee, complaint Guarantee and complaint matters are dealt with in accordance with the Sale of Goods Act. [. . . ] To lock the handlebar in a fixed position, attach the stops as shown in the illustration (E). You must release the brake by pulling the OPC lever to the handle before pulling out the cord. Pull the Operator Presence Control to release the brake on the engine. A bottle of the correct amount of oil is included with the mower, SAE 30. Move the axles between the notches to achieve the desired cutting height. Check oil level periodically and after every five hours of operation. Add oil as necessary to keep the level to the FULL mark on the dipstick. Use a good quality SAE 30 four stroke oil. Change the oil after the first five hours operation and thereafter every 25 working hours. Always change the oil while the engine is warm - but not hot - never attempt any maintenance on a hot engine. Use fresh regular grade lead free petrol. NEVER USE LEADED PETROL Using leaded petrol will make the exhaust smoke and cause irreparable damage to engines fitted with a catalytic converter. Do not fill the fuel tank when the engine is hot. Do not fill the fuel tank while smoking. Do not fill the fuel tank while the engine is running. To avoid introducing dirt into the fuel system, wipe all grass and dirt from the petrol filler cap before unscrewing it. It is recommended that you fill the tank through a funnel with a filter. Fill the tank with unleaded petrol, do not mix with oil. Do not fill with petrol while the engine is running. Any petrol spillage should be hosed away with water. Take care that water does not enter the engine. Starting the cold engine Push primer bulb firmly 3 times before starting cold engine. [. . . ] Ask your local Service Centre to clean the air filter thoroughly and carry out any service or repairs required. Do not store your lawnmower immediately after use. Wait until the engine has cooled to avoid a potential fire hazard. Store in a cool, dry place where your lawnmower is protected from damage. [. . . ]