User manual HUSQVARNA NOVOCUT 64

[. . . ] Adjustment is carried out by pulling out the setting knobs and replacing them in the desired position. There is a gap of a few hundredths of a millimeter between the cylinder blades and the bottom blade. The blades are of hardened steel and retain their sharpness over many years if the mower is correctly used and well maintained. [. . . ] Small burrs can arise which cause a scraping sound. This sound disappears gradually if the damage is only slight. Small blemishes (burrs) can be removed using a small file or similar. The filing must be done with care so that the cutting edges of the blades are not damaged. In cases of serious wear or damage, the blade cylinder and bottom blade must be returned for round grinding, flat grinding or replacement. Adjustment may become necessary if the mower starts to cut unevenly or make more noise after a long period of use. Turn the mower upside down and, as in fig 4, locate any damage to the blades. File away burrs and uneven parts (taking care not to damage the cutting edges). then test the blade setting by cutting paper. It incorporates a friction free cutting method which is suitable for well-kept lawns etc. NovoLette is easy to handle and is quiet in use. Follow the instructions to ensure safe and correct use. For safe use, it is important that every person who uses the lawnmower is acquainted with the instructions. ⷠNever allow children to use or play with the lawnmower. ⷠBefore use, check the function of the mower and the tightness of the nuts and screws. ⷠCheck that the lawn is free from stones and other objects that could cause personal injury or damage to the mower. ⷠFor maximum safety, protective goggles and robust shoes with nonslip soles should be worn. Take care when mowing sloping areas ­ mow diagonally if possible. [. . . ] Take care when mowing sloping areas ­ mow diagonally if possible. ⷠUse the mower only in daylight. Take care when resetting and servicing the mower. [. . . ]