User manual HUSQVARNA PP 325 E

[. . . ] Please read the operator's manual carefully and make sure you understand the instructions before using the machine. The machine can be a dangerous tool if used incorrectly or carelessly, which can cause serious or fatal injury to the operator or others. Please read the operator's manual carefully and make sure you understand the instructions before using the machine. Approved protective helmet Approved hearing protection Protective goggles or a visor Breathing mask Protective goggles or a visor must be worn. [. . . ] The power unit is constructed as a wheeled cart with the possibility of hanging hydraulic hoses for simple transportation at the workplace. For transportation between workplaces, the power unit should be stored in vertical position with the distribution box facing upwards. Store the equipment in a lockable area so that it is out of reach of children and unauthorized persons. Never use the machine if you are tired, if you have drunk alcohol, or if you are taking medication that could affect your vision, your judgement or your co-ordination. Never pull out the plug by pulling the cord. Keep all cords and extension cords away from water, oil and sharp edges. Make sure the cord is not pinched in doors, fences or the like. Otherwise it can cause the object to become live. When replacing hoses, hoses marked 'non-conducting dielectric" must be used. The hoses must be regularly checked for their electrical conductive insulation in accordance with special instructions. Working close to gas conduits: Always check and mark out where gas pipes are routed. Cutting close to gas pipes always entails danger. Make sure that sparks are not caused when cutting in view of the risk of explosion. remain concentrated and focused on the task. Carelessness can result in serious personal injury or death. Run the hydraulic system until it reaches its operation temperature of 30°C before starting to saw, to reduce return pressure and other wear. Never leave the machine unsupervised with the motor running. Always saw in a manner that permits easy access to the emergency stop. Make sure that there is always another person close at hand when you use the machines, so that you can call for help if an accident should occur. People that need to be in close proximity of the machine must wear hearing protection as the sound level when cutting exceeds 85 dB(A). Do not use the machine in bad weather, such as dense fog, rain, strong wind, intense cold, etc. Working in bad weather is tiring and can lead to dangerous conditions, e. [. . . ] Level = black line Do not exceed the max. Level when filling the tank with hydraulic fluid. The hydraulic fluid expands when it gets hot and can overflow if the level is too high. The couplings should be wiped clean to reduce the risk of leakage before the hoses are fitted. [. . . ]