User manual HUSQVARNA SNOW BLADE 964 99 40-02

[. . . ] ⷠNever allow children to use or play with the lawnmower. ⷠBefore use, check the function of the mower and the tightness of the nuts and screws. ⷠCheck that the lawn is free from stones and other objects that could cause personal injury or damage to the mower. [. . . ] Take care when mowing sloping areas ­ mow diagonally if possible. ⷠUse the mower only in daylight. Take care when resetting and servicing the mower. ⷠWhen the mower is not in use it should be stored out of the reach of children. Remember that the cylinder rotates easily and the blades are sharp; the mower can cause serious personal injury. The handle is fitted using the accompanying lower nut and bolt. Two fixed 10 mm spanners are needed for tightening, or two adjustable spanners. Hold the handle vertical and insert the lower part on one side into the wide slot so that the stud enters the side hole. A well-kept lawn needs mowing once a week, or even more frequently during the growing season. File away burrs and uneven parts (taking care not to damage the cutting edges). then test the blade setting by cutting paper. Use a paper quality which matches the paper in these instructions. Loosen both screws until the cylinder can just be rotated freely. start to tighten the left-hand screw (fig. 5) and rotate the cylinder until it begins to make light contact with the bottom blade. Then loosen the screw so that the cylinder just leaves the bottom blade and rotates quietly. repeat this procedure on the right-hand side. Check the setting as before, with paper. [. . . ] The mower should be cleaned each time it is used. The mower should be stored in a dry place. Small repairs can usually be carried out by the owner. [. . . ]