User manual HUSQVARNA SR 600 SWEEPER ATTACHMENT

[. . . ] Read through the Operator`s manual carefully and understand the content before using the machine. These instructions supplement the instructions that were included with the machine. Under no circumstances may the design of the machine be modified without the permission of the manufacturer. Non authorised modifications and/or accessories can result in serious personal injury or the death of the operator or others. [. . . ] To work in bad weather conditions is tiring and can create dangerous circumstances, e. Make sure you can walk and stand safely. Look out for any obstacles with unexpected movement (roots, stones, branches, pits, ditches, etc. Take great care when working on sloping ground. The engine should be switched off before moving. Never put the machine down with the engine running unless you have good sight of it. Safety instructions while working ⷠAlways ensure you have a safe and firm foothold. ⷠAlways hold the machine with both hands. Keep your hands and feet away from the sweeper when the engine is running. When the engine has been switched off, keep your hands and feet away from the sweeper until it has come to a complete stop. ⷠAlways use full throttle when using the sweeper. ⷠThe sweeper works best when the rubber blades can quickly slide over or stroke the surface. New or replaced sweeper rollers tend to stick or drag on hard surfaces, and should therefore be run in properly before use. The easy way to run them in is to run the machine at full throttle for 3­5 minutes on loose gravel or a similarly abrasive material. After running-in the sweeper can easily clear a wide variety of materials, from snow and puddles of water, to heavier objects such as gravel and wood chippings. With practice you will learn how the sweeper works, but you must think of safety right from the start! ⷠAlways drop to idling speed after each working operation. Longer periods running at full throttle without loading the engine (that is without resistance, which the engine feels from the cutting equipment when trimming) can lead to serious engine damage. When you want to clear narrow areas, such as pavements, the machine can be used so that it throws the material straight ahead of you. If you want to cover wider areas you may need to work at an angle so that long heaps build up on one side. Long heaps consisting of light material can be gathered together in a single line or pile for collecting later, while hard or bulky material may have to be collected in several long heaps. To clear in corners you can change the direction of rotation by turning over the machine. [. . . ] The air filter must be oiled in order to work satisfactorily. Oiling the air filter Always use HUSQVARNA filter oil, order no. The filter oil contains a solvent to make it spread evenly through the filter. You should therefore avoid skin contact. [. . . ]