User manual HUSQVARNA T85 BS

[. . . ] We are very concerned about the quality of our products and we reserve the right to make any technical modifications to improve them, without warning. Prevent accidents due to unsuitable use, by an untrained person, during maintenance, repairs, overhauls, handling or transport · improve the reliability and durability of the machine · Ensure correct use, regular maintenance, and fast fault finding in order to reduce repair costs and downtime. The use of symbols on machines (in color) and in the manual identify advice concerning your safety. OBLIGATIONxxxxBlue background, white marking : obligatory safety OBLIGATIONxxxx+ red marking : movement forbidden WARNINGxxxxBlack triangle and marking on a yellow background : danger if not adhered to. [. . . ] Risk of injury to the user or third parties, with possibility of damage top the machine or the tool. PROHIBITIONxxxx Red circle with or without bar : use or presence prohibited. INFORMATIONxx xxInformation - Instruction: special instructions concerning use and inspection. The manufacturer declines any responsibility resulting from improper use, or modifications. It should be read and used by any person installing or using the machine. The obligatory technical regulations in force in the country where the machine is used must also be adhered to for maximum safety. This symbol indicates that the machine is in conformance with the applicable European directive. Before use, read the instructions carefully and familiarise yourself with the machine. The working area must be perfectly tidy, well lit and must offer no risks (no humidity or dangerous products in the vicinity). Check that there is sufficient water supply during operation. - Towards the end of the cut, do not push too hard. Pass the material slowly and without force, through the diamond blade. The manufacturer declines all responsibility for loss or damage resulting from misuse or any modification, alteration or powering that does not conform to the manufacturer's original specifications. At the work station, the sound pressure level may exceed 85 db (A) In this case individual protection measures must be taken. Check frequently the water level through the overflow (change water as often as necessary) After each use, stop the machine by means of the on - off switch. Repairs Contact your supplier who is entirely at your service to carry out repairs in the shortest time at the best possible price. The instructions for use and spare parts found in this document are for information only and are not binding. As part of our product quality improvement policy, we reserve the right to make any and all technical modifications without prior notice. [. . . ] As part of our product quality improvement policy, we reserve the right to make any and all technical modifications without prior notice. In the event of deterioration and scrapping of the machine, the following items must be disposed of in accordance with the requirements of the legislation in force. Anslutning till nätet med en kabel typ H07 RNF med tvärsnittsarea 1, 5 mm upp till 50 m. Reparationer Vi finns alltid till hands för dig för att reparera din maskin inom kortast möjliga tid och till våra bästa priser (adressen finns på baksidan). [. . . ]