User manual HUSQVARNA VIKING 180

[. . . ] 8 Dongle and Hardware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Dongle. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Drivers. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Error Messages. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] For some reason, the height of the design is stored as a negative number. If you combine the file first and then view it, it should appear correctly. M02 Nothing appears when I try to use Quick 3DStitch View in any of my System 5 programs You must have your screen colors set to High Color (16 bit) or greater (True Color, 24-bit). First close any programs you are using. 2. 5. Right-click the mouse on the desktop and a pop-up menu will appear. Left-click on Properties and the Display Properties dialog box will appear. Use the drop-down arrow in the box titled Color Palette to select High Color (16-bit) or greater. The screen will be adjusted, then another message will appear asking if you wish to keep these settings. Click OK to continue (let the computer restart if required). If you are unable to alter your display, consult your computer retailer. M03 My background image does not appear, or only partly appears Your graphics card driver is misinterpreting the 3D calculations from the program. Check that you have downloaded and installed the latest drivers for your graphics card, this may clear the problem instantly. If the latest driver is still causing the program to not function correctly then you must lower the graphics acceleration provided by the card: For Windows® 95/98/ME users: 1. Move the slider all the way to the left for 'None'. Click 'OK' on both the windows to close them and try to view in Quick 3D View again. If it now works you can try to place the slider into the optimum position. This is where the slider is at the rightmost, but still allows the 3D View to work. This can only be down by trial and error; change the slider setting and test to see if you can still view in Quick 3D View. For Windows® NT/2000 users, your options may vary depending on your Graphics Card: 1. Right-click on an empty spot on your desktop to get a menu and choose Properties. Select the Performance tab at the top of the new window. You should now see a box labeled '3D Settings (OpenGL)'. Uncheck the option 'Use 3D acceleration'. Click 'OK' on both the windows to close them and try to view using Quick 3DStitch View again. 2. [. . . ] If all the View Toolbar functions are turned on and you still cannot locate a toolbar, it may have had all the icons removed. If you move icons around it is possible to delete them. Click View, Toolbar and the Customize dialog will appear. Click the name of the missing toolbar to highlight it. [. . . ]