User manual I-GO AUTO AIR 85

[. . . ] Select the correct tip for your notebook by reviewing the attached tip compatibility hang tag or going to www. iGo. com ­using the wrong tip may damage your computer or cause it to malfunction. Unplug iGo auto/air85 from the power outlet each time you attach a new tip to the cable. Keep the adapter away from heat sources, such as electric heaters, and avoid direct sunlight exposure. Cet appareil numériqué de la classe B est conformé à la norme NMB-003 du Canada This Class B digital apparatus complies with Canadian ICES-003. Environmental Requirements Ambient operating temperature is -5ºC to 40ºC Storage temperature is -20ºC to 85ºC iGo power products deliver the precise amount of power to each device through the use of interchangeable tips. Using iGo power products with patented tip technology eliminates concern about the correct amount of power for your device or trying to select it yourself as you do with other products--we do it for you! [. . . ] Always use the appropriate cables and connectors supplied with your adapter as shown in this User Guide. Use of cables, connectors or other accessories not supplied with your product may result in injury or damage to your device. FCC Compliance for iGo dualpower® Accessory This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. ©2002-2006 Mobility Electronics, Inc. Mobility Electronics, iGo and iGo dualpower are registered trademarks and powered up and connected is a trademark of Mobility Electronics, Inc. All other brand names and logos are trademarks or registered trademarks of their respective owners. Specifications are subject to change without notice. Protected by one or more of the following patents: 5, 347, 211, 6, 064, 177, 6, 700, 808, 6, 643, 158, 6, 650, 560, 6, 751, 109, 6, 775, 163 6, 791, 853, 6, 920, 056, 6, 937, 490 and 6, 976, 885. Other United States and foreign patents pending. A. Over-voltage protection Over-current limit Over-temperature protection Short circuit protection Safety Features DC input: DC output to notebook: Unit dimensions: Specifications Unit weight: Cord lengths: * Peak output power is defined as the maximum achievable wattage, sustained for ten seconds or less, under the following specific conditions: · DC Input: 13. 8 VDC minimum · DC Output: 18 VDC Troubleshooting Notebook model not listed on enclosed compatibility chart Device is not charging when iGo dualpower is configured LED does not light but unit appears to power devices Issue Notebook is not charging LED does not light up Compatibility is always being updated Tip not installed on Notebook Input Cord Light burned out Probable Cause(s) Possible Solution(s) No input or output power Check plug connector Check cable connections Check outlet circuit breaker or fuse No electricity to unit 11. 5-28 VDC; 8A max Up to 70W continuous; 84W peak* 3. 91 x 2. 01 x 1. 23" (99. 0 x 50. 9 x 32. 0mm) 6. 9oz (195. 61g) DC output-6. 0 (1. 83m); DC input-3. 0' (0. 91m) See www. iGo. com for current compatibility information Contact iGo customer service (see contact information on the back of this guide) Install tip on Notebook on Input Cord See solutions to "Notebook is not charging" device batteries that meet or exceed the original manufacturer specifications. CAUTION: Like the power adapter that came with your electronic device, this iGo adapter may get warm to the touch during use. This is normal. Avoid placing your iGo adapter in direct sunlight or next to heat sensitive materials. Auto, Boat or RV: Plug the auto/air outlet cord into any standard in-vehicle outlet. Your vehicle may need to be running in order to get power. The illuminated LED indicates the adapter is ready to use. If the LED does not illuminate, check the connections and you may need to check the in-vehicle power outlet fuse. Please refer to your vehicle manual for instructions on how to check the fuse box and replace power outlet fuse if needed. Note: In some vehicles, power to the outlet is always on. These vehicles may not require the ignition to be turned on. CAUTION: It is not recommended to have this iGo adapter connected to your electronic device when starting the engine. The power may be interrupted causing your system to reset. Note: We recommend that you only use iGo auto/air85 with Air: You will need to find the in-flight power outlet in the How to Use This iGo Auto/Air Power Adapter airplane. The power outlet is usually located in the arm of your seat, typically near the same location used to plug in headphones. Please ask a flight attendant for the exact location of the outlet. Once located, plug the in-flight connector into the airline power outlet. Some airline outlets may have vehicle type outlets where the in-flight connector is not necessary. Carrying case iGo notebook power adapter Package Contents 2-year limited warranty Warranty Thank you for purchasing an iGo mobile solution. Help us serve you better by taking a moment to register your product at www. iGo. com/registration. By registering, you are eligible for benefits including 90 days of free tech support, automatic notification of product updates and other special promotions. Product Registration Compatibility hang tag User Guide Notebook input cord Auto charging plug iGo dualpower accessory Notebook tips (See attached hang tag for corresponding models and tips) Auto/air outlet cord (DC) Mobility Electronics, Inc. [. . . ] If the LED is not lit, be sure to check all connections. Check Troubleshooting for additional information. Plug the notebook input cord into the notebook. Air Cord 3. Insert the auto/air outlet cord into the iGo auto/air85 body. AC Power Cord Air: Remove the auto connector to uncover the connector for use with EMPOWER® outlet as shown. [. . . ]