User manual I-GO BATTERY RECHARGER

[. . . ] FCC Compliance This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. [. . . ] Specifications are subject to change without notice. Protected under one or more of the following patents: 5, 347, 211, 6, 967, 885 and D506, 981. Other United States and foreign patents pending. A. Package Contents iGo® battery recharger Quick Connect Guide Carefully read this Quick Connect Guide before using this iGo accessory for the first time. Incorrect usage can result in your batteries not charging properly. An iGo charger is required to use this accessory (sold separately). Insert one or two NiMH rechargeable AA or AAA batteries as indicated by the battery diagrams on the unit 2. Plug the unit onto any iGo charger and make sure that the arrow on the charger's connector faces up 3. Once connected, plug the iGo charger into any power outlet 4. The blue light will begin to flash to indicate the batteries are charging 5. Once the batteries are fully charged the blue light will stop flashing and glow solid 6. Unplug the battery recharger and remove the batteries connector blue light Use with any iGo® power charger (sold separately) NOTE: If a faulty or damaged battery is inserted into the unit, the blue light will not illuminate. [. . . ] · Use only with compatible iGo chargers and adapters. · Be aware that rechargeable batteries degrade over time and should be replaced periodically to ensure your gadget performs as expected. [. . . ]