User manual I-GO WALL MAX

[. . . ] Select the correct tip for your notebook by reviewing the attached tip compatibility hang tag or going to www. iGo. com ­ using the wrong tip may damage your computer or cause it to malfunction. Unplug iGo wallMAX from the power outlet each time you attach a new tip to the cable. Keep the adapter away from heat sources (such as electric heaters) and avoid direct sunlight exposure. Keep the adapter free of dust and moisture, and avoid exposure to corrosive chemicals (such as cleaning fluids). [. . . ] If your notebook tip is not included in this package, visit www. iGo. com to locate additional tips for purchase. WARNING ­ Using the wrong tip may damage your device or cause it to malfunction. FCC Compliance This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: · Reorient or relocate the receiving antenna · Increase the separation between the equipment and receiver · Connect the equipment into an outlet on a circuit different from that to which the receiver is connected · Consult the dealer or an experienced radio/TV technician for help Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the product. Canada Compliance This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numériqué de la classe B est conformé à la norme NMB-003 du Canada. Environmental Requirements Ambient operating temperature is 0ºC to 40ºC Storage temperature is -40ºC to 85ºC Product Support We are committed to providing our customers with first-class customer service and product support. You can receive help in a variety of ways: Sales/Customer Service: 1-888-205-0093 Technical Support: 1-800-474-7593 Web: www. iGo. com Power Your Mobile Phones, Smartphones/PDAs, MP3 Players, Digital Cameras. . . So, you would like to power and charge an additional portable electronic device?All you need is the included iGo dualpower® accessory and the appropriate tip to simultaneously power/charge two electronic devices (additional tips sold separately). FCC Compliance for iGo dualpower® Accessory This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. © 2002-2007 Mobility Electronics, Inc. Mobility Electronics, iGo and iGo dualpower are registered trademarks and powered up and connected is a trademark of Mobility Electronics, Inc. All other brand names and logos are trademarks or registered trademarks of their respective owners. Specifications are subject to change without notice. Protected by one or more of the following patents: 5, 347, 211, 6, 064, 177, 6, 700, 808, 6, 643, 158, 6, 650, 560, 6, 751, 109, 6, 775, 163, 6, 791, 853, 6, 920, 056, 6, 937, 490 and 6, 976, 885. Other United States and foreign patents pending. P/N 8040430-01 Rev. A Over-voltage protection Over-current limit Over-temperature protection Short circuit protection Surge protection Safety Features AC input: Unit dimensions: Specifications Troubleshooting Notebook not listed on enclosed compatibility chart Device is not charging when iGo dualpower is configured LED does not light LED does not light but unit appears to power devices Notebook is not charging Issue Tip not installed on Notebook Input Cord Probable Cause(s) No input or output power No electricity to unit Compatibility is always changing Light burned out 100-240 VAC; 50/60 Hz 3. 0 x 5. 6 x 0. 9" (78. 3 x 141. 0 x 23. 4mm) Contact iGo customer service (see contact information on the back of this guide) See www. iGo. com for current compatibility information Install tip on Notebook Input Cord Check plug connector Check cable connections Check outlet circuit breaker See above solutions Possible Solution(s) device is turned on or off. Note: We recommend that you use iGo power adapters only with device batteries that meet or exceed the original manufacturer's specifications. CAUTION: Like the power adapter that came with your electronic device, this iGo adapter may get warm to the touch during use. [. . . ] If the LED is not lit, be sure to check all connections. Check Troubleshooting for additional information. AC Power Cord 2. Insert the AC power cord into the iGo wallMAX body. Wall outlet: Use as shown. iGo dualpower® Accessory Tip Selection: Make sure you have selected the right tip for the device you want to charge by checking the compatibility hang tag. Tech note: 4. When using iGo dualpower with this iGo adapter, the maximum power output is shared between both devices. [. . . ]