User manual I-MATE JAM DATASHEET

[. . . ] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Waveform Vector Monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-32 [Color Control] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-34 [Custom Preset]. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] When [Sequence] or [Frame] mode is selected in the [Option Settings] window, you can finalize and save the recording file while recording. Starts/Stops recording onto the hard disk. CONSOLE Windows Various Settings and [Performance Check] Camera and Picture Control Recording onto the Hard Disk Playback the Recorded Files 4-29 Camera and Picture Control [Control] Tab When the camcorder is set to the Camera mode, you cannot control all settings on [Control] tab. Set the camcorder's recording program to EXT. CONT. 1 [WHITE BALANCE] You can adjust the white balance by clicking the indicated marks. Placing the mouse cursor on the panel and right clicking the mouse turns the pointer to the right; left clicking the mouse turns the pointer to the left. The panel image differs depending on the camcorder you are connecting. The screen shot below will be displayed when connecting the XH G1 or XH A1. 1 2 3 7 8 1 6 4 5 1 2 7 2 3 / Auto Preset A/B Automated adjustment of the white balance. Adjust the white balance to the preset setting. 3 4 4 5 6 6 5 7 Custom White Balance While one of the presets is being selected, clicking on this button registers the white balance setting. - For details about saving the white balance settings, refer to the camcorder instruction manual. Color Temperature Specifies the color temperature. Clicking or in the Kelvin text box increases and decreases the value by 100K. 1 2 3 4 Displays the recording file name, a recording mode, a file type and the video folder specified in the [Option Settings] window ( 3-17). Displays the number of data droppings occurred during recording ( Plays back the file selected in [Recording history] ( 1 2 4 3 CONSOLE Windows Various Settings and [Performance Check] Camera and Picture Control Recording onto the Hard Disk Playback the Recorded Files 4-32 Camera and Picture Control 1 [Color Picker] Waveform Vector Monitor This monitor shows a waveform and color information of the picture displayed in the [Rec Viewer]. The values of selected pixel in [Rec Viewer] are displayed. 1 2 3 4 1 2 3 1 2 3 4 Displays/Hides the color picker. Displays the coordinate of the selected pixel. Displays the color of the selected pixel. Displays the numeric color value of the selected pixel. When the color picker is activated, a marker will be displayed on the preview. You can drag the marker to select a pixel. 7 4 6 5 CONSOLE Windows Various Settings and [Performance Check] Camera and Picture Control Recording onto the Hard Disk Playback the Recorded Files 4-33 Camera and Picture Control 2 [Line Select] You can select the image-scanning mode of the waveform monitor and the vector scope. 1 2 6 [Wave Mode] You can select the display mode of the waveform monitor. In the PARADE mode, the waveform monitor will be tri-partitioned. [Composite]: Displays a luminance and color-difference signal [Y]: [YUV]: 3 [RGB]: Displays the luminance signal Displays the luminance signal, the blue differential signal, and the red differential signal in PARADE mode. Displays RGB signals in the PARADE mode in the R, G, B order. 1 Switches over between the line and full scan mode. [. . . ] Change the drive or delete some files to free more disk space. The [Option Settings] window is open, or performance check is being carried out. The sequence number of the file exceeds the maximum value (e. g. Change the video folder or the file name. [. . . ]