User manual I-MATE SP5 DATASHEET

[. . . ] READ THIS INFORMATION BEFORE USING YOUR DEVICE. Users are not permitted to make changes or modify the device in any way. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. [. . . ] See Ref IC Self-Marking 6(f) and RSP-100 Sec. 4. 3 FCC Notice to Users This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: · Reorient or relocate the receiving antenna. · Increase the separation between the equipment and the receiver. · Connect the equipment to an outlet on a circuit different from that to which the receiver is connected. · Consult the dealer or an experienced radio/TV technician for help. 4 Introduction What Is Bluetooth® Wireless Technology? Bluetooth devices communicate without wires, using built-in radio transceivers that operate on a globally available radio frequency to ensure worldwide compatibility. Your Bluetooth Wireless Portable Speaker can communicate with other Bluetooth devices within a range of approximately 10 meters (33 feet). 5 Portable Speaker Features 1 Multifunction Button (MFB) and Speaker Indicator LED: Controls speaker function and provides visual indication about speaker status. 2 Headset Jack: Plug in an extra headset during phone conversations. 3 Point the microphone toward your mouth. 4 Remove the speaker from your visor when charging. Note: Do not leave the HF820 in a hot vehicle for any extended period of time. Wearing the Portable Speaker In the Holster The charger receptacle and all buttons are exposed for ease of operation when in a holster. 1 Insert the portable speaker into the holster. 2 Use the belt clip to wear the unit on your belt or other convenient location. On a lanyard 1 Place a lanyard around the lanyard loop on the top of the unit. 3 Point the microphone toward your mouth. 10 Turning the Portable Speaker On and Off Press the volume button to turn the portable speaker on. Press and hold the volume button for 2-3 seconds to turn the portable speaker off. 11 Using the Portable Speaker with a Headset You can plug an extra headset into your wireless portable speaker. Pairing Your Portable Speaker and Phone Note: You must pair your portable speaker and phone before you can make a call. "Pairing" creates a link between devices with Bluetooth® wireless technology, and allows the phone to remember the portable speaker's unique ID. When your speaker and phone are paired, the speaker automatically connects to the phone*(some phones do not support this feature). 12 With the portable speaker and phone in close proximity: 1 Press the volume button once to put the speaker into pairing mode. 2 Initiate the pairing sequence using handsfree mode if available. The speaker may also be paired in headset mode if handsfree mode is not available. [. . . ] The device ID is now stored in the phone's memory. Pairing is successful when the MFB indicator flashes 10 times rapidly 13 Pairing to Additional Devices Your speaker can store pairing information for up to eight different devices with Bluetooth wireless technology. Devices are stored in a "Paired Device List" in memory in the order entered. When an attempt to pair to more than eight devices is made, the oldest paired device is removed from the list. [. . . ]