User manual IBM THINKPAD 560X

[. . . ] i Note Before using this information and the product it supports, be sure to read the general information under "Notices" on page 231. First Edition (May 1996) The following paragraph does not apply to the United Kingdom or any country where such provisions are inconsistent with local law: INTERNATIONAL BUSINESS MACHINES CORPORATION PROVIDES THIS PUBLICATION "AS IS" WITHOUT ANY WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE LIMITED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Some states do not allow disclaimers or express or implied warranties in certain transactions; therefore, this statement may not apply to you. This publication could include technical inaccuracies or typographical errors. Changes are periodically made to the information herein; these changes will be incorporated in new editions of the publication. [. . . ] b) Find the line: C:\WINDOWS\MOUSE. COM /Y c) Change it to: C:\DOS\MOUSE. COM /Y d) Find the line that includes SHARE. EXE and delete that line. e) Save the file and restart the computer. 4 Select your display resolution type: a) Start DOS and go to the WINDOWS subdirectory. b) Type SETUP to start Windows setup program. c) Using the Up Arrow ( ), highlight Display and press Enter. d) Select Other (Requires disk. . . ) from the list. e) Insert the Video Features Diskette for Windows 3. 1 into the diskette drive; then type A: and press Enter. f) Select your desired resolution from the menu and press Enter. Verify that Display has changed to your desired resolution type (an example is shown in the following screen). If the item has not changed, return to step 4c. 122 IBM ThinkPad 560 User's Guide Installing Windows 3. 11 Note: If you do not know what to choose, it is recommended that you choose 256 Color for the color palette, 800 by 600 pixels for the Desktop area, and Small Fonts for the font size. Windows Setup =============== Setup has determined that your system includes the following hardware and software components. If your computer or network appears on the Hardware Compatibility List with an asterisk, press F1 for Help. Computer: Display: Mouse: MS-DOS System with APM Cyber9385/82 8 ×6 256 small font Microsoft, or IBM PS/2 g) Press Enter to continue the installation. h) After the installation is complete, remove any diskette from the diskette drive and restart the computer. When you start Windows from the DOS prompt, do not close the LCD while the program is loading; if you do, the computer will stop running. If you want to continue to install all device drivers, continue with "Installing the ThinkPad Features Program for Windows 3. 11" on page 124. Chapter 7. Installing Software 123 Installing the ThinkPad Features Program for Windows 3. 11 Installing the ThinkPad Features Program for Windows 3. 11 Note: If you are going to use Windows, install the ThinkPad Features When installing an operating system, program for DOS first (see page 116); then do the following to install you need to install the ThinkPad the ThinkPad Features program for Windows 3. 11: Features program. 1 2 Turn on the computer and start Windows. Select File from the Program Manager window; then select Run. . . from the pull-down menu. P ro g ra m F ile M anager O p tio n s W in d o w s H e lp N e w. . . E n te r F7 F8 Del A lt+ E n te r R u n . . . E x it W in d o w s . . . 3 4 5 Insert the Utility Diskette 1 into the diskette drive. Follow the instructions on the screen. Default choices are already highlighted at the Installation Options screen. You have completed the installation of the ThinkPad Features program. If you want to continue to install all device drivers, continue with "Installing the PC Card Director for Windows 3. 11" on page 125. 124 IBM ThinkPad 560 User's Guide Installing the PC Card Director for Windows 3. 11 Installing the PC Card Director for Windows 3. 11 Note: When installing an operating system, you need to install the PC The PC Card Director for Windows Card Director. You must install the following device drivers and 3. 11 must be installed with Windows software associated with PCMCIA before you can use the PC Cards: 3. 11 or a later version with enhanced Card Services device driver mode. Socket Services device driver To use PC Card Director: Page 48. Resource Map Utility device driver PC Card Power Management device driver PC Card Director Utility PC Card client device drivers (only when PC Card Director does not support the PC Card) To install the PC Card Director: 1 2 3 4 5 Turn on the computer and start Windows. Select File from the Program Manager window; then select Run. . . Insert the PCMCIA Installation Diskette for DOS/Windows into the diskette drive. [. . . ] One or more microinstructions used in a product as an alternative to hard-wired circuitry to implement functions of a processor or other system component. A device that connects your computer to a telephone line, allowing it to communicate with another computer at another location. Moving Pictures Experts Group parallel port. A port used to attach such devices as dot-matrix printers and input/output units; it transmits data 1 byte at a time. partial suspend mode. [. . . ]