Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual ICEBERG 73004. We hope that this ICEBERG 73004 user guide will be useful to you.
Lastmanuals help download the user guide ICEBERG 73004.
Detailed instructions for use are in the User's Guide.
[. . . ] Position brackets over pre-drilled holes and using screws secure tightly.
Step 2. Locate 4 pre-drilled holes in each corner. Insert and tighten screws through each hole. [. . . ] Insert and tighten screws through each hole. Repeat steps for each caster.
Step 5. Locate 2 pre-drilled holes and hinge seat, on each door. Insert hinge assembly into hinge seat with hinge holes over pre-drilled holes in door. Holding by end, fold hinge arm down.
CAUTION Hinges arms are spring loaded, fold down carefully.
Cabinet Assembly
Step 6. Standing Top on it's front (slotted edge down), position the 2 center panels on edge. Line up the 2 pre-drilled holes on the top of each panel and insert them onto the center Cam-Lock pins. Insert locking nut into pre-drilled hole and rotate 1/2 turn or until tight. Using screwdriver, slightly tighten screw to hold door in place. Repeat procedure for all 4 hinges.
Step 16. Insert 8 shelf support pins into pre-drilled holes. All 4 pins which support each shelf should be level.
Step 13. Close both doors and look at how they line up. Using the leveling set screw (front), loosen or tighten to level the doors from side to side.
Step 17. Turning each shelf at a slight angle insert into cabinet and position on shelf support pins. IMPORTANT If shelf does not rest flat on pins raise shelf, remove pins, reposition into hole, and lower shelf.
Step 14. [. . . ] Turning each shelf at a slight angle insert into cabinet and position on shelf support pins. IMPORTANT If shelf does not rest flat on pins raise shelf, remove pins, reposition into hole, and lower shelf.
Step 14. Using the rear set screw, loosen and move the hinge in or out to adjust the tightness of the door against the cabinet. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE ICEBERG 73004
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual ICEBERG 73004 will begin.
