User manual ICEBERG 96361

[. . . ] Press ENTER to continue. " appears, press ENTER. (When " " appears on the display, the text is continued to the next page. Press to see the entire text string. ) When the "Start setup?" display appears, press / to select "OK, " then press ENTER. Wireless LAN router/ access point Listening to music services You can listen to various music services offered on the Internet. 2 When "Network Settings" appears, press ENTER. [. . . ] 3 Select "Wireless LAN. " 4 Select "Access Point Scan. " Listening to music stored on your server (PC) You can listen to audio content stored on a server (PC) that supports DLNA standards via your home network. The unit displays a list of network names (SSIDs) of available access points. ©2010 Sony Corporation Printed in China 5 Select the network name (SSID) from the list. 6 Enter the security key (WEP Key, WPA/WPA2 Key) of your network, and press ENTER. Follow the steps below to enter characters and numbers. 1 Before you start using the unit 2 1 2 3 1 Press CHARACTER repeatedly to select the type of characters and numbers (select "abc" for entering lowercase letters of the alphabet and numbers, "ABC" for uppercase letters of the alphabet and numbers, and "123" for numbers only). 2 Press the corresponding numeric/text button to enter the desired character or number, then press to move the cursor to the next input position. Repeat this operation to enter the text string. 3 Press ENTER to confirm and save the text string. Insert batteries into the remote control. R6 (size AA) 2 7 When "Save settings and check connection. Press ENTER to continue. " appears, press ENTER. Connect the AC adaptor and the power cord. The unit Press / to see the entire text string. It may take a while for the unit to complete the network settings. Press BACK to go back to the previous directory. The [Network and Sharing Center] window appears. Select [Customize]. 4 Listening to music stored on your server (PC) Add a check mark to [Private] and select [Next]. The [Set Network Location] window appears. You must set up the server (PC) in advance. If you encounter any trouble while the unit is connected to a network, confirm the network status and settings. "Confirming the network settings" in the Operating Instructions For details on the server settings for servers other than Windows 7, Windows Vista, or Windows XP: Operating manuals or help of the respective servers, etc. Confirm that the [Location type] has been changed to [Private] and select [Close]. Confirm that [(Private network)] is displayed in the [Network and Sharing Center] window and close the window. If a check is not added next to [Share my media] in the [Media Sharing] window that is displayed in step , add a check mark to [Share my media], then select [OK]. 4-1 Setting up the server (PC) When using a PC equipped with Windows 7 This section explains how to set up a manufacturer-installed version of Windows Media Player 12 for Windows 7. For details on the use of Windows Media Player 12: Windows Media Player 12 Help Select [Settings. . . ] that appears beside [Share my media to:]. Add a check mark to [Allow new devices and computers automatically] and select [OK]. Note Uncheck this item after you confirm that the unit can connect to the PC and play audio data on the PC. A list of connectable devices is displayed. Go to [Start] - [Control Panel] and select [View network status and tasks] under [Network and Internet]. The [Network and Sharing Center] window appears. Tip If the desired item does not appear on the display, try to change the display type used by the Control Panel. 4-2 Playing music stored on your server (PC) 1 Press FUNCTION repeatedly to select "HOME NETWORK. " A server list appears. Select [Public network] under [View your active networks]. [. . . ] Add a check mark to [Allow new devices and computers automatically] and select [OK]. Note Uncheck this item after you confirm that the unit can connect to the PC and play audio data on the PC. A list of connectable devices is displayed. Go to [Start] - [Control Panel] and select [View network status and tasks] under [Network and Internet]. The [Network and Sharing Center] window appears. Tip If the desired item does not appear on the display, try to change the display type used by the Control Panel. 4-2 Playing music stored on your server (PC) 1 Press FUNCTION repeatedly to select "HOME NETWORK. " A server list appears. Select [Public network] under [View your active networks]. If the display shows other than [Public network], go to step . 2 Press / to select the PC to be connected and press 1 4 2 3 ENTER. When the server list does not appear, press OPTIONS and select "Refresh. " The server list is refreshed. Select [Home network] or [Work network] according to the environment in which the unit is being used. The [Set Network Location] window appears. 3 Select the item you want to play. The items that are displayed (tracks, artists, albums, genres, folders, etc. ) depend on the connected server (PC). [. . . ]