User manual ICOM IC-4088E

[. . . ] INSTRUCTION MANUAL LPD FM HANDHELD TRANSCEIVER i4088E FOREWORD Thank you for purchasing the IC-4088E LPD (Low Power Device) FM transceiver. This LPD FM transceiver meets the European LPD specification (EN 300 220). This transceiver is designed for those who require top-grade quality, performance and outstanding reliability under the most demanding conditions. D FEATURES Free of user-license and applications Voice scrambler function for communication privacy External DC-IN jack for both operation and battery charging (Optional BC-149D or CP-18E is required) All 69 LPD channels are available 38 convenient group channels I ATS (Automatic Transponder System) This convenient function automatically checks station availability within the operating range, and alerts you via function display indication. 20) In addition, a manual transponder is also available for "GROUP MODE" operation to check availability of stations in a specified group within the operating range. [. . . ] AVOID over charging-- The BP-202 can be charged during operation when the AC adapter or the optional cigarette lighter cable is connected. To prevent over charging, the IC-4088E has charging timer that automatically disconnecting the charging line electronically after 15 hours from charging. However, the charging timer will reset and start charging again when disconnect then re-connecting the AC adapter or CP-18E more than 1 min. Recommended temperature range for charging: +10°C to +40°C The optional BP-202 BATTERY PACK includes rechargeable Ni-Cd batteries and can be charged approx. Charge the battery pack before first operating the transceiver or when the battery pack becomes exhausted. If the battery pack seems to have no capacity even after being fully charged, completely discharge it by leaving the power ON all day. Then, fully charge the battery pack again. If the battery pack still does not retain a charge (or very little), a new battery pack must be purchased. D Operating period Depending on the installed battery, the operating period of the transceiver varies. 22 for operating period details. 5 3 BATTERY CHARGING I Charging connections D Regular charging with the BC-149D, CP-18E Connect the optional BC-149D AC ADAPTER or CP-18E CIGARETTE LIGHTER CABLE to [DC 6V]. 15 hours Optional CP-18E Cigarette lighter cable with DC-DC converter to cigarette lighter socket to [DC 6V] jack Optional BC-149D to AC outlet IMPORTANT!: Use the BC-149D or CP-18E ONLY. Other type of AC adapter, cigarette lighter cable or DC power cable with an external power supply may damage the transceiver. The optional BP-202 can only be charged-- other AA (R6) size rechargeable Ni-Cd cannot be charged. BE SURE to disconnect the CP-18E from the cigarette lighter socket when charging is finished, because, a slight current still follows in the CP-18E and the vehicle's battery will become exhausted. 6 BATTERY CHARGING 3 D Rapid charging with the BC-119N+AD-105 q Insert the optional AD-105 DESKTOP CHARGER ADAPTER into the charging slot of the BC-119N. w Insert the battery pack, either by itself or attached to the transceiver, into the charger. IC-4088E BP-202 3 Turn the power OFF!When the installed Ni-Cd battery is nearly exhausted and the function display blinks in intermittently, push [PWR] until the transceiver's power goes OFF. IMPORTANT: To maximize the readability of the transmitted signal, pause a few sec. after pushing [PTT], hold the transceiver 10 to 15 cm from your mouth and speak at a normal voice level. NOTE: The transceiver has an auto power save function to conserve the battery power. The power save function activates automatically when no signal is received for 5 sec. 10 RECEIVE AND TRANSMIT 5 Talk Range The IC-4088E is designed to maximize performance and improve transmission range in the field. However, the single most important factor in transmit range (talk power) is the surrounding environment. These radios are "line of sight" radios and as such, transmission range are influenced by the degree to which you can "see" the other communicating party. Large concrete structures and heavy foliage or transmission from inside a building or vehicle will reduce the talk power range. [. . . ] range : ­10°C to +55°C · No. : 38 · Dimensions : 52. 5(W)×102. 5(H)×26. 9(D) mm (projections not included) · Weight (approx. ) · Output power · Ext. connector · Sensitivity (12 dB SINAD) · Audio output power (at 4. 5 V DC) · Ext. speaker connector · Battery life (Tx:Rx:Standby=1:1:8) *LR6(G) is used : 200 g (including 3×AA (R6) batteries) : Less than 10 mW ERP : 3-conductor 2. 5 (d) mm/2. 2 k : Less than 0. 2 µV; ­14 dBµ : More than 100 mW at 10 % distortion with an 8 load : 3-conductor 3. 5 (d) mm/8 : Battery type Battery life 3 alkaline cells* BP-202 approx. [. . . ]