User manual ICOM IC-F33GS

[. . . ] INSTRUCTION MANUAL VHF TRANSCEIVER UHF TRANSCEIVER iF33GT/GS iF43GT/GS This device complies with Part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause harmful interference. IMPORTANT READ ALL INSTRUCTIONS carefully and completely before using the transceiver. PRECAUTION R CAUTION!NEVER hold the transceiver so that the antenna is very close to, or touching exposed parts of the body, especially the face or eyes, while transmitting. The transceiver will perform best if the microphone is 2 to 4 in. [. . . ] q Push [Scrambler] to turn the scrambler function ON. ·" " appears. w Push [Scrambler] again to turn the scrambler function OFF. ·" " disappears. 15 4 BIIS OPERATION I Receiving a call D Individual call q When an individual call is received; · Beeps sound. · " " appears and the mute is released. · The programmed text message (e. g. " ") and the calling station ID (or text) is displayed alternately, depending on the setting. · " " appears or blinks depending on the setting. I Default setting The following functions are assigned to each programmable key as the default. However, the assigned function can be changed by your dealer. NOTE: [TX Code Enter] must be assigned to any key. : Push to transmit a 5-tone/BIIS call when the selected channel is a 5tone or MSK channel, respectively. [P1]; Digital : Push to select the call list ID/transmit message, or to display the receive message record for selection. [P3]; TX Code Enter : Push to enter the direct ID code edit mode for both 5-tone and MSK. [UP]/[DOWN]; CH Up/Down : While in the standby condition, selects the operating channel. After pushing [Digital] or [TX Code CH Select], selects call list or TX code channel, respectively. [MONITOR]; Moni(Audi): Push this key after the communication to send a `Clear down' signal during MSK channel operation. [P2]/[RED]; Null : No function is assigned. [P0]; Call Appears Appears or blinks w Push and hold [PTT], then speak into the microphone at a normal voice level. ·" ·" " indicator appears. " appears while receiving a signal. e Release [PTT] to return to receive. r To finish the conversation, push [MONITOR] (Moni(Audi)) to send the `Clear down' signal. · Either station can send a `Clear down' signal. ·" " is displayed for 2 sec. · " " disappears and the transceiver returns to the standby condition. 16 BIIS OPERATION 4 D Group call q When a group call is received; · Beeps sound. · " " appears and the mute is released. · The programmed text message (e. g. " ") and the calling station ID (or text) is displayed alternately, depending on the setting. · " " appears or blinks depending on the setting. D Displaying the received call record -- Queue indication The transceiver memorizes the calling station IDs for record. Up to 3 calls can be memorized, and the oldest call record is erased when a 4th call is received. [. . . ] · FA-SC73US STUBBY ANTENNA Shorter UHF antenna. Frequency range: 450­490 MHz · FA-SC56VS STUBBY ANTENNA Shorter VHF antenna. Frequency range: 150­162 MHz · FA-SC57VS STUBBY ANTENNA Shorter VHF antenna. Frequency range: 160­174 MHz Some options may not available in some countries. [. . . ]