User manual ICOM IC-F70

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual ICOM IC-F70. We hope that this ICOM IC-F70 user guide will be useful to you.

Lastmanuals help download the user guide ICOM IC-F70.

Download

Manual abstract: user guide ICOM IC-F70

Detailed instructions for use are in the User's Guide.

 [. . . ] (IC-F70 series

 Push to select the MDC menu after entering the MD menu selection mode.  Push to select the desired transceiver alias or message channel while in the transceiver alias or message channel selection mode. MDC SELCALL KEY
"SELC" is displayed on the key indicator. (IC-F70 series only)

Consult your Icom dealer or system operator for details concerning your transceivers programming.  [. . . ] q Push [MDC Call] to enter the MDC menu selection mode. 
· Or push [MDC CallAlert] to enter the transceiver alias selection mode. In this case,  skip steps w and e. 

D Transmitting a Stun Call
Stun call allows you to send MDC 1200 signal that will stun the targeted station. q Push [MDC Call] to enter the MDC menu selection mode. w Select "STUN" using [CH Up],  [CH Down],  [MDC Up] or [MDC Down]. For IC-F1700 series For IC-F70 series

w Select "CALALERT" using [CH Up],  [CH Down],  [MDC Up] or [MDC Down]. For IC-F1700 series For IC-F70 series

STUN

CALALERT
e Push [MDC Call] again to enter the transceiver alias selection mode. r Select the desired alias using [CH Up],  [CH Down],  [MDC Up] or [MDC Down]. t Push [PTT] to transmit the stun call to the selected station. 
· "STN TX" is displayed. 

e Push [MDC Call] again to enter the transceiver alias selection mode. r Select the desired alias using [CH Up],  [CH Down],  [MDC Up] or [MDC Down]. t Push [PTT] to transmit the CallAlert to the selected station. 
· "CA CALL" is displayed. 

y Release [PTT]. 
· "STN ACK" is displayed if the targeted station is turned ON,  on channel and within range. · "STN FAIL" is displayed if the targeted station does not send an acknowledgement. 

y Release [PTT]. 
· "CA OK" is displayed if the targeted station received the alert. · "CA FAIL" is displayed if the targeted station does not send an acknowledgement. 

u After a specified time period has passed,  the transceiver will return to receive. 

u After a specified time period has passed,  the transceiver will return to receive. 3

2

MDC 1200 OPERATION D Transmitting a Radio Check Call
Radio check call allows you to determine whether another transceiver is turned on,  within range and on channel without requiring any action from the targeted station user. q Push [MDC Call] to enter the MDC menu selection mode. w Select "RADIOCHK" using [CH Up],  [CH Down],  [MDC Up] or [MDC Down]. For IC-F1700 series For IC-F70 series

D Transmitting a Revive Call
Revive call allows you to send MDC 1200 signals that will revive the targeted (stunned) station. q Push [MDC Call] to enter the MDC menu selection mode. w Select "REVIVE" using [CH Up],  [CH Down],  [MDC Up] or [MDC Down]. For IC-F1700 series For IC-F70 series

REVIVE RADIOCHK

e Push [MDC Call] again to enter the transceiver alias selection mode. r Select the desired alias using [CH Up],  [CH Down],  [MDC Up] or [MDC Down]. t Push [PTT] to transmit the revive call to the selected station. 
· "REV TX" is displayed. 

e Push [MDC Call] again to enter the transceiver alias selection mode. r Select the desired alias using [CH Up],  [CH Down],  [MDC Up] or [MDC Down].  [. . . ] · " " (for IC-F1700 series) or " " (for IC-F70 series) blinks. · The calling station ID (or alias) and "SELCALL" are displayed alternately. 

D Emergency Calls
The MDC 1200 Emergency feature can be accessed using the [Emergency Single] or [Emergency Repeat] key (described in the instruction manual). The transceiver will repeatedly send an Emergency MDC 1200 command for a programmed length of time until it receives an acknowledgement signal. The emergency call can be transmitted without a beep emission and LCD indication change depends on the setting.  [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE ICOM IC-F70

Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets...
In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.

Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual ICOM IC-F70 will begin.