User manual ICOM IC-M127

[. . . ] "LOCATED AT . . . . . . . . . . . . . . . " (your position) 5. The nature of the distress and assistance required. Any other information which might facilitate the rescue. USING DIGITAL SELECTIVE CALLING (Ch 70) (DS-100 (#02) DSC CONTROLLER is required) DISTRESS CALL PROCEDURE 1. Push and hold [DISTRESS] on the DS-100 for 5 sec. [. . . ] · Available functions may differ depending on dealer setting. · The optional HM-134 has it's own settings for the beep tone, internal speaker and LCD contrast. w While pushing and holding [16], turn power ON to enter set mode. e After the display appears, release [16]. r Push [16] to select the desired item, if necessary. t Rotate the channel selector to select the desired condition of the item. y Turn power OFF, then ON again to exit set mode. · SET MODE CONSTRUCTION ATIS check Scan mode Scan resume timer Dual/tri watch ATIS check Scan mode Scan timer DUAL/TRI Push Beep tone 16 Beep LCD contrast Internal speaker Scrambler type Scrambler code Scrambler type 14 Scrambler code LCD contrast Internal speaker SET MODE 6 I Set mode items ï Scan mode The transceiver has 2 scan modes: normal scan and priority scan. Normal scan searches all tag channels in the selected channel group. Priority scan searches all tag channels in sequence while monitoring channel 16. Set mode Scan mode Priority scan (default) Normal scan ï Dual/tri watch This item sets the [DUAL] switch function as dual watch or triwatch. See the section `Dual watch/Tri-watch' for details. 1 e Microphone hanger . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 r Microphone hanger cable* (OPC-1096 : Black) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 t Mounting bracket knobs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 y Microphone hanger screws (3 × 16 mm) . . . . . . . . . . . . . . . . . . . . . . . . . 2 u Mounting screws (5 × 20 mm) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 i Flat washers (M5) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 o Spring washers (M5) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 * Depending on version. I Fuse replacement Two fuses are installed in the supplied DC power cable. If a fuse blows or the transceiver stops functioning, track down the source of the problem, if possible, and replace the damaged fuse with a new, rated one. I Cleaning t If the transceiver becomes dusty or dirty, wipe it clean with a soft, dry cloth. AVOID the use of solvents such as benzene or alcohol, as they may damage transceiver surfaces. q e y u i w r o 18 CONNECTIONS AND MAINTENANCE 8 I Connections q t w EXTENSION JACK Connects to the optional DS-100 (#02) DSC CONTROLLER. e EXTERNAL MICROPHONE CONNECTOR Connects to the optional HM-134 REMOTE-CONTROL MICROPHONE. r w e · Intercom function is available. [. . . ] to activate the intercom function. · "IC" appears in the priority channel readout. · The channel name disappears. I Channel names q Push [Y]/[Z] to select a channel to program. · While pushing and holding [H/L], push [DIAL] several times to select the channel group (USA and INT), if desired. w While pushing and holding [H/L], push [16·C]. · The 1st character of the currently programmed comment flashes. w Push [PTT] to talk. ·" " appears in the channel name indicator. Appears when the intercom function is in use. e Push [Y]/[Z] to select a character. r Push [SQL] to move to right; then push [Y]/[Z] to select a character. · Push [VOL] to move to the left. e Release [PTT] to listen. ·" " appears in the channel name indicator when the transceiver is in talking mode. r Push [DUAL] to cancel the intercom function. · Pushing [16], [SCAN·TAG] or [DIAL] is also cancels the intercom function. t Continue until the desired characters have been selected, then push [16·C] to return to normal operation. · Available characters (space) () (4) (E) (O) (Y) (i) (s) (!) (+) (5) (F) (P) (Z) (j) (t) (") (, ) (6) (G) (Q) (a) (k) (u) (#) (­) (7) (H) (R) (b) (l) (v) ($) (. ) (8) (I) (S) (c) (m) (w) (%) (/) (9) (J) (T) (d) (n) (x) (&) (0) (A) (K) (U) (e) (o) (y) (') (1) (B) (L) (V) (f) (p) (z) (( ) (2) (C) (M) (W) (g) (q) ( )) (3) (D) (N) (X) (h) (r) For your reference: In case the intercom mode is selected with the transceiver during microphone power OFF, the microphone power is automatically turned ON and the intercom mode is selected. ï Intercom beep function Push and hold [DIAL] for more than 1 sec. · Emits intercom beep while holding. 38 HM-134 CONNECTIONS AND INSTALLATION I HM-134 supplied accessories Accessories included with the HM-134: Qty. [. . . ]