User manual ICOM IC-M402S

[. . . ] With the extra large font, the channel number is maximized on the display and upper and lower case characters can be easily read. Built-in ITU Class-D DSC No matter what channel you're tuned to, a separate and independent receiver inside the IC-M402S continuously monitors Ch. The 10-keypad allows simple and efficient operation of the DSC emergency functions, vital for your safety at sea. Position request and position report Over and above the DSC, your own and other ships' position data can be exchanged with the position request or position report functions. The received position information can be transferred to external GPS or navigation equipment*. [. . . ] The received position information can be transferred to external GPS or navigation equipment*. In addition, the polling (request/ reply) function checks whether a specific ship is within the communications range. * NMEA 0183 format is required. A GPS information example on 37×73mm size display 30 Watt 2-way hailer capability When connected to an external hailer horn, communication with other boats, deck or dock hands is easy. The built-in 30W amplifier increases your talk power making your message loud and clear. Four fog horn patterns are available for the automatic fog horn, adding further to the safety of the ship. Improved GPS information indication When connecting to an external GPS receiver, the GPS information indication function shows course and speed data as well as position, date and time on the display. on VHF marine ANDMICIIIs TM TM Optional fully integrated Commandmic VHF MARINE TRANSCEIVER Front and rear panel microphone connection The speaker microphone can be detached from the front panel and can be connected to the rear panel without any modification. An optional 6. 1m (20ft) microphone extension cable, OPC1000, is available. Transparent installation image Up to two COMMANDMICIIIsTM can be connected The optional COMMANDMICIIITM provides a 2nd and/or 3rd station capability to operate the IC-M402S from up to 18. 3m* (60ft) away such as the cabin and/or fly bridge. * Requires use of two optional OPC-1541 extension cables. Full control and intercom capability On the deck RX speaker function The RX speaker function, "receiver-repeater" allows you to monitor the received radio audio from a hailer horn on the deck or tower. You can also make an announcement onboard from the microphone. All functions of the IC-M402S, including distress call, DSC, and hailer, are available. The intercom function allows you to talk with the IC-M402S or another COMMANDMICIIITM. speaker Hailer, Foghorn or Rx-speaker Applicable U. S. Military Specifications The IC-M402S and HM-162E have been tested to and passed the following MIL-STD requirements and strict environmental standards. Standard Low Pressure High Temp. Shock Solar Radiation Rain Humidity Salt Fog Dust Blowing Vibration Shock MIL 810 C MIL 810 D Method Proc. 500. 1 I 500. 2 I, II 501. 1 I 501. 2 I, II 502. 1 I 502. 2 I, II 503. 1 I 503. 2 I 505. 1 I 505. 2 I 506. 1 I, II 506. 2 I, II 507. 1 I, II 507. 2 II, III 509. 1 I 509. 2 I 510. 1 I 510. 2 I 514. 2 VIII, X 514. 3 I 516. 2 I, II, V 516. 3 I, IV MIL 810 E Method Proc. 500. 3 I, II 501. 3 I, II 502. 3 I, II 503. 3 I 505. 3 I 506. 3 I, II 507. 3 II, III 509. 3 I 510. 3 I 514. 4 I 516. 4 I, IV MIL 810 F Method Proc. 500. 4 I, II 501. 4 I, II 502. 4-3 I, II 503. 4 I 505. 4 I 506. 4 I, III 507. 4 ­ 509. 4 ­ 510. 4 I 514. 5 I 516. 5 I, IV · HM-162E REMOTE-CONTROL MICROPHONE Size (W×H×D): 65. 5×150×38 mm Weight (approx. ;except cables): 385g Supplied accessories : · 6. 1m of cable, OPC-1540, with external speaker terminal · Microphone hanger · Mounting base for cable connector DO NOT connect the HM-134B to the IC-M402S as this may damage the transceiver. HM-134B COMMANDMICTM is NOT compatible with the IC-M402S. · OPC-1541 EXTENSION CABLE FOR HM-162E 6. 1m of extension cable for additional separation length when using the COMMANDMICIIITM. [. . . ] 500. 4 I, II 501. 4 I, II 502. 4-3 I, II 503. 4 I 505. 4 I 506. 4 I, III 507. 4 ­ 509. 4 ­ 510. 4 I 514. 5 I 516. 5 I, IV · HM-162E REMOTE-CONTROL MICROPHONE Size (W×H×D): 65. 5×150×38 mm Weight (approx. ;except cables): 385g Supplied accessories : · 6. 1m of cable, OPC-1540, with external speaker terminal · Microphone hanger · Mounting base for cable connector DO NOT connect the HM-134B to the IC-M402S as this may damage the transceiver. HM-134B COMMANDMICTM is NOT compatible with the IC-M402S. · OPC-1541 EXTENSION CABLE FOR HM-162E 6. 1m of extension cable for additional separation length when using the COMMANDMICIIITM. · HM-126RB SPEAKER MICROPHONE Same as supplied. [. . . ]