User manual ICOM IC-M71

[. . . ] INSTRUCTION MANUAL VHF MARINE TRANSCEIVER iM71 DECLARATION OF CONFORMITY We Icom Inc. Japan 1-1-32, Kamiminami, Hirano-ku Osaka 547-0003, Japan Declare on our sole responsability that this equipment complies the essential requirements of the Radio and Telecommunications Terminal Equipment Directive, 1999/5/EC, and that any applicable Essential Test Suite measurements have been performed. Kind of equipment: Type-designation: VHF MARINE TRANSCEIVER 0560 Düsseldorf 27th Dec. 2005 Place and date of issue Icom (Europe) GmbH Himmelgeister straße 100 D-40225 Düsseldorf Authorized representative name iM71 Version (where applicable): This compliance is based on conformity with the following harmonised standards, specifications or documents: i) EN 301 178-2 V1. 1. 1 (2000-8) ii) EN 60945 2002 iii) EN 60950-1 2001 iv) EN 300 698-2 V1. 1. 1 (2000-8) v) EN 300 698-3 V1. 1. 1 (2001-5) vi) vii) H. [. . . ] Appears during squelch level adjustment Push e To turn the scrambler function OFF, repeat step w. · "SCRM" disappears. Appears when the voice scrambler function is in use. D Programming scramble codes There are 32 codes (1 to 32) available for programming. In order to understand each other, all transceivers in your group must use the same scramble code, as well as the same scrambler unit. 22 for "Scrambler code" setting details. I Backlighting function This function is convenient for night-time operation. The backlighting can be turned OFF in the SET mode. 19) Push any key other than [PTT] to turn the backlighting ON. · The backlighting is automatically turned OFF after 5 sec. of inactivity. 11 4 BASIC OPERATION I VOX function NOTE: An optional headset and optional headset adapter are required for the VOX operation. The VOX function (voice operated transmission) starts transmitting when you speak into the headset's microphone. The IC-M71 automatically returns to receive mode when you stop talking. Push and hold [ ], then push [H/L·LOCK] to turn the VOX function ON or OFF while connecting the headset and optional headset adapter to [SP MIC] connector. · "VOX" appears on the LCD while the VOX function turns ON. · The VOX gain and VOX delay can be set on the SET mode. 22) · During scan, dual/tri-watch or on a transmission inhibited channel, the VOX function will not be activated. I Channel naming The IC-M71 has a capability to assign up to 10-character channel names or comments for each operating channel, including each weather channel. This provides easy recognition of channel usage, or station names, etc. When shipped from the factory, the IC-M71 is programmed with default names for each VHF marine channel. These defaults can be changed, if desired. You may replace the factory-set opening comment with a comment of your own. The opening comment appears each time the IC-M71 is powered ON. The comment may be up to 16 characters long. D Available characters (=) (4) (D) (N) (X) (h) (r) () (5) (E) (O) (Y) (i) (s) (+) (6) (F) (P) (Z) (j) (t) (­) (7) (G) (Q) (a) (k) (u) (, ) (8) (H) (R) (b) (l) (v) (/) (0) (1) (A) (K) (U) (e) (o) (y) (2) (B) (L) (V) (f) (p) (z) (3) (C) (M) (W) (g) (q) I AquaQuake water draining function The IC-M71 uses a new technology to clear water away from the speaker grill: AquaQuake. AquaQuake helps drain water away from the speaker housing (water that might otherwise muffle the sound coming from the speaker). The IC-M71 emits a vibrating noise when this function is being used. Push and hold both [16·C] and [H/L·LOCK]. · A low beep tone sounds for 9 sec. to drain water, regardless of [VOL] control setting. · The transceiver never accepts a key operation while the AquaQuake function is activated. [. . . ] · Recharge the battery pack. -- p. 25­27 Transmitting continuously · Ambient noise is too loud. while not speaking when using VOX function. "CHARGE" comment blinks · The connected battery is depleted. 30 VHF MARINE CHANNEL LIST · International channels CH 01 02 03 04 05 06 07 08 09 10 Frequency (MHz) Transmit 156. 050 156. 100 156. 150 156. 200 156. 250 156. 300 156. 350 156. 400 156. 450 156. 500 Receive CH Frequency (MHz) Transmit 156. 550 156. 600 156. 650 156. 700 156. 750 156. 800 156. 850 156. 900 156. 950 157. 000 Receive 156. 550 156. 600 156. 650 156. 700 156. 750 156. 800 156. 850 161. 500 161. 550 161. 600 CH 21 22 23 24 25 26 27 28 60 61 Frequency (MHz) Transmit 157. 050 157. 100 157. 150 157. 200 157. 250 157. 300 157. 350 157. 400 156. 025 156. 075 Receive 161. 650 161. 700 161. 750 161. 800 161. 850 161. 900 161. 950 162. 000 160. 625 160. 675 CH 62 63 64 65 66 67 68 69 70 71 Frequency (MHz) Transmit 156. 125 156. 175 156. 225 156. 275 156. 325 156. 375 156. 425 156. 475 Rx only 156. 575 CH Receive 160. 725 72 160. 775 73 160. 825 74 160. 875 75*2 160. 925 76*2 156. 375 77 156. 425 78 156. 475 79 156. 525 80 156. 575 81 Frequency (MHz) Transmit 156. 625 156. 675 156. 725 156. 775 156. 825 156. 875 156. 925 156. 975 157. 025 157. 075 Receive 156. 625 156. 675 156. 725 156. 775 156. 825 156. 875 161. 525 161. 575 161. 625 161. 675 CH 82 83 84 85 86 87 88 12 Receive 161. 725 161. 775 161. 825 161. 875 161. 925 157. 375 157. 425 Frequency (MHz) Transmit 157. 125 157. 175 157. 225 157. 275 157. 325 157. 375 157. 425 160. 650 11 160. 700 12 160. 750 13 160. 800 14 160. 850 15*1 156. 300 16 160. 950 17*1 156. 400 18 156. 450 19 156. 500 20 *1 Channels 15 and 17 may also be used for on-board communications provided the effective radiated power does not exceed 1 W, and subject to the national regulations of the administration concerned when these channels are used in its territorial waters. [. . . ]