Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual IDEAL ST-860. We hope that this IDEAL ST-860 user guide will be useful to you.
Lastmanuals help download the user guide IDEAL ST-860.
Detailed instructions for use are in the User's Guide.
[. . . ] Safety Notes
Read the following safety information carefully before attempting to operate or service the meter. Use the meter only as specified in this manual; otherwise the protection provided by the meter may be impaired. 2 Rated environmental conditions : (1) Indoor use. [. . . ] -4-
If the counter clockwise indicator is lit, alternate the connection two of the three alligator clips. When the clockwise indicator is lit and the power source terminals are connected by the RED, YELLOW and BLUE alligator clips, the phase sequence indicators (R, S and T) shall be lit respectively.
2 Operation of Motor Rotation Tester : (1) Make sure there is no voltage present. (2) Connect the test leads to motor input terminals by L1-L2-L3, and press the power button (Fig1). (If the clockwise or counter clockwise red indicator is lit before rotating the motor shaft, it means voltage is present. Take off the test leads and turn off the external power). If the clockwise indicator is lit, it means there is a 3-phase motor connection to the power supply by L1L2-L3. The 3-phase motor should be rotated clockwise. (3) Connect the leads to 3-phase motor by L1-L2-L3, and press the power button. -5-
Rotate the motor shaft counter clockwise. If counter clockwise indicator is lit, it means there is a 3-phase motor connection to the power supply by L1-L2-L3. The 3-phase motor should be rotated clockwise. (4) If you require the motor to rotate counter clockwise, you should change the 2 connection to L1-L2-L3. The motor should be rotated counter clockwise.
-6-
5. Specifications
Input Voltage : 100V AC up to 600V AC max. Circuit Structure : All electronic (not mechanical). Power Consumption : Consumption current approx. [. . . ] Do not use abrasives or solvents.
-8-
If the meter is not in use for periods of longer than 60 days, remove the battery and store them separately.
7. Warranty
This meter is warranted to the original purchaser against defects in material or workmanship for one year following the purchase of the tester. will, at its option, replace or repair the defective unit, subject to verification of the defect or malfunction. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE IDEAL ST-860
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual IDEAL ST-860 will begin.
