User manual IHOME IHM60

[. . . ] This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada. IMPORTANT Read before proceeding If you have any question reagarding the operation or use of this product, please vist www. ihomeaudio. com to view answers to frequently asked questions. To learn more about this and other iHome products, please visit us online at www. ihomeaudio. com For Models That Use Lithium Batteries: · Lithium batteries can explode or cause burns if disassembled, shorted, recharged, exposed to water, fire, or high temperatures & not handled appropriately · Do not place loose batteries in a pocket, purse, or other container containing metal objects, do not mix with used or other battery types, or store with hazardous or combustible materials. [. . . ] It is always best to have a clear area from where the cable exits the unit to where it is plugged into an AC socket. Cleaning ­ The unit should be cleaned only as recommended. See the Maintenance section of this manual for cleaning instructions. Objects and Liquid Entry ­ Care should be taken so that objects do not fall and liquids are not spilled into any openings or vents located on the product. Attachments ­ Do not use attachments not recommended by the product manufacturer. Lightning and Power Surge Protection ­ Unplug the unit from the wall socket and disconnect the antenna or cable system during a lightning storm or when it is left unattended and unused for long periods of time. This will prevent damage to the product due to lightning and power-line surges. Overloading ­ Do not overload wall sockets, extension cords, or integral convenience receptacles as this can result in a risk of fire or electric shock. Damage Requiring Service ­ The unit should be serviced by qualified service personnel when: A. the power supply cable or plug has been damaged. objects have fallen into or liquid has been spilled into the enclosure. the unit has been dropped or the enclosure damaged. the unit exhibits a marked change in performance or does not operate normally. Periods of Nonuse ­ If the unit is to be left unused for an extended period of time, such as a month or longer, the power cable should be unplugged from the unit to prevent damage or corrosion. Servicing ­ The user should not attempt to service the unit beyond those methods described in the user's operating instructions. Service methods not covered in the operating instructions should be referred to qualified service personnel. Visit www. ihomeaudio. com or call 1-800-288-2792 Toll Free 3. 13. Using the iHM60 To unlock and expand the speaker, grip the top and bottom and give a small twist counter-clockwise. DO NOT pull hard once open, as the built in spring will automatically extend the speaker to its proper position Press speaker down from the top and twist clockwise to lock in place. Connecting the iHM60 Extend the Speaker USB Connection LED Power Switch · Connect the mini-USB plug to the audio/charge input jack on the speaker. · Connect the stereo 3. 5mm audio plug to the headphone jack or line-out of any audio device. · Slide the Power Switch of the speaker to the ON position. · Press play on your audio device and adjust its volume to listen to audio. [. . . ] Enclose a check or money order payable to the order of SDI Technologies, for the sum of $10. 00 ($20. 00 without proof of purchase). Send the unit prepaid and insured, to the Factory Service Center listed below. Consumer Repair Department SDI Technologies Inc. 1330 Goodyear Drive El Paso, TX 79936-6420 Disclaimer of Warranty NOTE: This warranty is valid only if the product is used for the purpose for which it was designed. It does not cover (i) products which have been damaged by negligence or willful actions, misuse or accident, or which have been modified or repaired by unauthorized persons; (ii) cracked or broken cabinets, or units damaged by excessive heat; (iii) damage to digital media players, CD's or tape cassettes (if applicable); (iv) the cost of shipping this product to the Factory Service Center and its return to the owner. [. . . ]