User manual IHOME IP49

[. . . ] Model iP49 Portable FM Stereo Alarm Clock Radio System for iPhone and iPod preset iPhone iPod radio aux wake-to rad aux io Questions?Visit www. ihomeaudio. com Table of Contents Quick Start Controls and Indicators / iP49 Display Getting Started Connect AC adaptor, Install Clock Backup Battery, Charging Internal Battery Setting Up the iP49 install iPod/iPhone insert, Setting the Time and Calendar using IPhone/iPod Time Sync Setting Time and Calendar Manually Using the Alarm Setting the Alarm, Review, Arming and Disarming Alarm Resetting the Alarm to Come on the Next Day, Sure Alarm, Snooze/Dimmer Listening to iPod/iPhone Listening to FM Radio Setting up the Antenna, Tuning and Playing the Radio Setting FM Radio Frequency/Range to use iP49 in Other Countries Using the Aux Line-In Jack with other Audio Devices, Sleep Timer, Using the Remote auto/on switch A Consumer Guide to Product Safety Troubleshooting 1 2 3 4 5 6 7 7-8 8 9 10 Maintenance · Place the unit on a level surface away from sources of direct sunlight or excessive heat. · Protect your furniture when placing your unit on a natural wood and lacquered finish. A cloth or other protective material should be placed between it and the furniture. [. . . ] When the alarm is sounding, press the snooze button to silence the alarm for the set snooze time. The alarm will sound again once the snooze time has elapsed. You can press snooze several times during the 1 hour alarm cycle. Press the snooze button during normal operation to step through the display dimmer settings: High, medium, low and off. 6 Listening to iPod/iPhone 1. Select and place the insert for your iPhone or iPod model. Gently insert an already playing iPhone or iPod. The iP49 will automatically turn on and you will hear the music playing from your iPod/iPhone. Note: If the playing song/music loudness is too low on the iPod itself, the iP49 may not detect that the iPod/iPhone is in play mode. Press the or Button to change iPod/iPhone track forward/reverse. When the iPhone/iPod is docked and in standby mode, press the Button to play it. When the iPhone or iPod is in play mode, press the Button to pause play; press again to resume play. Press the BonGiovi Button to activate the DPS active digital processing circuit. Press the Volume or Button to adjust the iP49 volume. Press the eq Button as needed to cycle through treble and bass sound settings. Press the or Button to adjust settings for best sound. Your iPhone/iPod will continue charging while in the dock if unit is connected to AC power. It will not charge when running on internal battery. Listening to FM Radio Setting up the Antenna Insert the FM Antenna plug into the Aux-in/FM Antenna Jack on the back of the unit. Extend the wire antenna fully for best reception. Do not strip, alter or attach to other antennas. Press the Radio/AUX Button as needed to turn iP49 on and toggle between FM radio and aux-in modes. The last selected radio station will play and the frequency will appear in the display. Press the or Button to tune radio to a desired station. [. . . ] Try reducing the output volume and EQ settings such as bass boost on the device itself. Remote control doesn't work Battery is weak or dead Remote Control is too far away or not aimed properly toward the device Remote switch is in AUTO position Unit is/feels warm This is normal. The unit has a rechargeable battery and charging circuit that may make the unit feel warm to the touch when in charging mode. Replace with new battery Point the Remote Control toward the unit and use within 30 feet of the unit. [. . . ]