User manual IIYAMA B2712HDS

[. . . ] USER MANUAL ENGLISH DEUTSCH FRANCAIS NEDERLANDS Thank you very much for choosing the iiyama LCD monitor. We recommend that you take a few minutes to read carefully through this brief but comprehensive manual before installing and switching on the monitor. Please keep this manual in a safe place for your future reference. POLSKI ENGLISH This display carries the TCO Certified label. This ensures that the display is designed for minimal impact on the climate and natural environment, while offering all the performance expected from top of the line electronic products. [. . . ] For installation on Windows 95/98/2000/Me/XP: The monitor Information File for iiyama monitors ENGLISH may be necessary for your computer and obtained via the Internet, using the address: http://www. iiyama. com NOTE For additional information on how to download the driver for your touch screen monitor, please access the internet site noted above. Monitor Drivers are not required in most cases for Macintosh or Unix operating systems. For further information, please contact your computer dealer first for advice. ADJUSTING THE HEIGHT AND THE VIEWING ANGLE For optimal viewing it is recommended to position yourself directly opposite to the full face of the monitor, then adjust the monitor's height and angle to your own preference. Hold the panel so that the monitor does not topple when you change the monitor's height or angle. You are able to adjust the monitor's height up to 85mm, angle up to 30 degrees right and left, 20 degrees upward, 3 degrees downward. In order to ensure a healthy and relaxed body position when using the monitor at visual display workstations, it is recommended that the adjusted tilt angle should not exceed 10 degrees. Adjust the monitor's angle to your own preference. NOTE Do not touch the LCD screen when you change the height or the angle. It may cause damage or break the LCD screen. Careful attention is required not to catch your fingers or hands when you change the height or the angle. Injury can occur if care is not taken to avoid finger contact with the displays base when adjusting the height. 7 BEFORE YOU OPERATE THE MONITOR 85mm 30 30 Monitor Stand OPERATING THE MONITOR To create the best picture, your iiyama LCD monitor has been preset at the factory with the COMPLIANT TIMING shown on page 21. You are also able to adjust the picture by following the button operation shown below. For more detailed adjustments, see page 15 for SCREEN ADJUSTMENTS. Press the MENU Button to start the On Screen Display feature. There are additional Menu items which can be switched by using the / Buttons. Picture OSD Display Audio Settings Miscellaneous Information Brightness Contrast H. Position V. Position Phase Clock Color Temp Auto Adjust 1920x1080 6500 90 80 50 50 41 50 Select the Menu item which contains the adjustment icon relating to the adjustment you want to make. Then, use the / Buttons to highlight the desired adjustment icon. / Buttons to make the appropriate Press the AUTO Button to leave the menu, and the settings you just made would be automatically saved. For example, to correct for vertical position, select Menu item of Picture and then press the MENU Button. Then, select V. Position by using the / Buttons. An adjustment page appears after you press the MENU Button. Then, use the / Buttons to change the vertical position settings. The vertical position of the overall display should be changing accordingly while you are doing this. Press the AUTO Button lastly, it ends, any changes are saved in the memory. Picture OSD Display Audio Settings Miscellaneous Information 90 80 50 50 41 50 6500 Brightness Contrast H. Position V. Position Phase Clock Color Temp Auto Adjust 1920x1080 NOTE When button operations are aborted during adjustment, On-Screen Display disappears when the time set for the OSD Timeout has passed. Also, press the AUTO button to quickly turn off the OnScreen Display. [. . . ] If the monitor does not get a picture, skip to 2. Consult the following items if you cannot find an appropriate adjustment item in OPERATING THE MONITOR or if the problem persists. If you are experiencing a problem which is not described below or you cannot correct the problem, discontinue using the monitor and contact your dealer or iiyama service center for further assistance. (Power indicator does not light up. ) (Power indicator is blue. ) The Power Cable is firmly seated in the socket. [. . . ]