User manual IIYAMA C1911S

[. . . ] USER MANUAL ENGLISH DEUTSCH FRANCAIS NEDERLANDS Thank you very much for choosing the iiyama LCD monitor. We recommend that you take a few minutes to read this comprehensive manual carefully before installing and switching on the monitor. Please keep this manual in a safe place for your future reference. POLSKI ENGLISH TABLE OF CONTENTS FOR YOUR SAFETY. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 SAFETY PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Unpack the stand and mount it onto the monitor base, aligning the base with the hook for the base. Slide the stand upward until you hear a click, which indicates that the stand is attached and installed. <Remove> Lay the monitor flat on a table with LCD screen face down. To prevent the monitor from being scratched, put a piece of soft cloth on the table on which the screen will be set. Hold the monitor and stand with both hands, and then slowly push the hook up, do not loose. Hold the monitor firmly with one hand and slide the stand downward with the other hand. Make sure you slide the stand down slowly or you may damage both the monitor and the stand. NOTE Please refer to label on back of stands base. 5 BEFORE YOU OPERATE THE MONITOR CONTROLS AND CONNECTORS <Front> <Back> Power Switch ( Power Indicator ) Power is ON. ) NOTE Blue: Orange: Power is OFF. For installation on Windows 95/98/2000/Me/XP: The monitor Information File for iiyama monitors http://www. iiyama. com NOTE For additional information on how to download the driver for your touch screen monitor, please access the internet site noted above. Monitor Drivers are not required in most cases for Macintosh or Unix operating systems. For further information, please contact your computer dealer first for advice. ADJUSTING THE VIEWING ANGLE For optimal viewing it is recommended to look at the full face of the monitor. Hold the stand so that the monitor does not topple when you change the monitor's angle. You are able to adjust the monitor's angle up to 20° upward, 5° downward. In order to ensure a healthy and relaxed body position when using the monitor at visual display workstations, it is recommended that the adjusted tilt angle should not exceed 10 degrees. Adjust the monitor's angle to your own preference. NOTE Do not touch the LCD screen when you change the angle. It may cause damage or break the LCD screen. Careful attention is required not to catch your fingers or hands when you change the angle. Do not tilt the post beyond 20 degrees except when repacking the monitor in its box. To do so may cause the monitor to fall over and break. BEFORE YOU OPERATE THE MONITOR 8 ENGLISH may be necessary for your computer and obtained via the Internet, using the address: OPERATING THE MONITOR To create the best picture, your iiyama LCD monitor has been preset at the factory with the COMPLIANT TIMING shown on page 19. You are also able to adjust the picture by following the button operation shown below. For more detailed adjustments, see page 14 for SCREEN ADJUSTMENTS. Press the Menu Button to start the On Screen Display feature. There are additional Menu items which can be switched by using the / Buttons. ENGLISH Select the Menu item which contains the adjustment icon relating to the adjustment you want to make. [. . . ] Perform the adjustments described in OPERATING THE MONITOR, depending on the problem you have. If the monitor does not get a picture, skip to 2. Consult the following items if you cannot find an appropriate adjustment item in OPERATING THE MONITOR or if the problem persists. If you are experiencing a problem which is not described below or you cannot correct the problem, discontinue using the monitor and contact your dealer or iiyama service center for further assistance. [. . . ]