User manual IIYAMA PROLITE E2273HDS

[. . . ] USER MANUAL ENGLISH Thank you very much for choosing the iiyama LCD monitor. We recommend that you take a few minutes to read carefully through this brief but comprehensive manual before installing and switching on the monitor. Please keep this manual in a safe place for your future reference. Congratulations! This display is designed for both you and the planet! The display you have just purchased carries the TCO Certified label. This ensures that your display is designed, manufactured and tested according to some of the strictest quality and environmental requirements in the world. [. . . ] Position Fine Tune Sharpness Video Mode Adjust Button. Position by using the An adjustment page appears after you press the / Buttons. Then, use the / Buttons to change the vertical position settings. The vertical position of the overall display should be changing accordingly while you are doing this. Press the Button lastly, it ends, any changes are saved in the memory. H. /V. Position Exit Select NOTE When button operations are aborted during adjustment, On-Screen Display disappears button can be used to when the time set for the OSD Time Out has passed. Also, the return previous menu and turn off the On-Screen Display. Any changes are automatically saved in the memory when the On Screen Display disappears. Turning off the power should be avoided while using the Menu. Position, Clock and Phase are saved for each signal timing. Except for these adjustments, all other adjustments have only one setting which applies to all signal timings. 10 OPERATING THE MONITOR ADJUSTMENT MENU CONTENTS Auto Image Adjust Only Analog Input Auto Image Adjust Adjustment Item Auto Image Adjust * Problem / Option Button to Press Direct Adjust H. Position, Clock and Phase automatically. * For best results, use the Auto Image Adjust in conjunction with the adjustment pattern. See page 17 for SCREEN ADJUSTMENTS. Direct You can skip the Menu items and display an adjustment scale directly by using the following button operations. Auto Image Adjust: Pressing and holding of the not displayed. Button for about 2 seconds when the Menu is Contrast/Brightness Adjustment Item Contrast *3 Contrast/Brightness Problem / Option Too dull Too intense Too dark Too bright Off On Off Typical Contrast Ratio Increased Contrast Ratio Normal Brightness of back-light is reduced. Button to Press Brightness *1, 3 ACR*2 ECO Mode 1 2 3 Brightness of back-light is reduced more than 1. Brightness of back-light is reduced more than 2. OD Off/1/2/3/4/5 It will improve the gray level response time of the LCD panel. A higher level results in a faster response time. *1 Adjust the Brightness when you are using the monitor in a dark room and feel the screen is too bright. *2 ACR can not enable the same time when ECO Mode is on. *3 Contrast and Brightness adjustment disabled when ECO Mode is active or when i-Style Color is set to Game or Cinema or Scenery or Text. OPERATING THE MONITOR 11 ENGLISH Input Select Adjustment Item Direct Input Select Problem / Option VGA DVI HDMI Auto Button to Press Input Select Select the VGA input. Search for an available input source and select automatically. ENGLISH NOTE Input source is fixed, not selected automatically when VGA, DVI, HDMI1 and HDMI2 which are selected. Direct You can skip the Menu items and display an adjustment scale directly by using the following button operations. Input Select: Press the Button when the Menu is not displayed. Audio Adjust Adjustment Item Volume Direct Audio Adjust Problem / Option Too soft Too loud Button to Press Return the sound volume to the previous level. Line-In HDMI Audio * HDMI * Suitable for HDMI input only. [. . . ] If the monitor does not get a picture, skip to 2. Consult the following items if you cannot find an appropriate adjustment item in OPERATING THE MONITOR or if the problem persists. If you are experiencing a problem which is not described below or you cannot correct the problem, discontinue using the monitor and contact your dealer or iiyama service center for further assistance. The picture does not appear. The (Power indicator Power Cable is firmly seated in the socket. [. . . ]