User manual IIYAMA PROLITE L5561S

[. . . ] USER MANUAL ENGLISH Thank you very much for choosing the iiyama LCD monitor. We recommend that you take a few minutes to read this comprehensive manual carefully before installing and switching on the monitor. Please keep this manual in a safe place for your future reference. ENGLISH CE MARKING DECLARATION OF CONFORMITY This LCD monitor complies with the requirements of the EC Directive 2004/108/EC "EMC Directive" and 2006/95/EC "Low Voltage Directive". In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures. [. . . ] For more detailed adjustments, see page 31 for SCREEN ADJUSTMENTS. Press the MENU Button to start the On Screen Display feature. Menu items which can be switched by using the Image Settings Scheme Brightness User 50 50 12 ENGLISH Contrast Sharpness Saturation Hue Backlight Colour Temperature & Gamma 100 or ENTER B Select the Menu item of the adjustment you want to make. Press the / Buttons to highlight the Buttons and enter the menu page. Use the C Press the appropriate adjustment or setting. / Buttons to make the D Press the EXIT Button to leave the menu, and the settings you just made would be automatically saved. For example, to correct for vertical position, select Menu item of Advanced Settings. Then, select Image Position by using the Buttons. Use the Buttons to change the vertical position settings. The vertical position of the overall / display should be changing accordingly while you are doing this. Press the EXIT Button lastly, it ends, any changes are saved in the memory. Advanced Setting Auto Adjustment Image Position Phase Clock VGA ADC Settings Flesh Tone IRFM Baud Rate Light Sensor WOD Mode Monitor ID Factory Reset Off Off 115200 Off Off 1 No 46 50 No Image Position 0 0 NOTE The MENU Button can be used to return previous menu item. When button operations are aborted during adjustment, On-Screen Display disappears when the time set for the OSD Timeout has passed. EXIT button can be used to return previous menu item. Any changes are automatically saved in the memory when the On Screen Display disappears. Turning off the power should be avoided while using the Menu. Adjustments for Image Position, Clock and Phase are saved for each signal timing. Except for these adjustments, all other adjustments have only one setting which applies to all signal timings. 18 OPERATING THE MONITOR OSD LOCK MODE: LOCK: Press ENTER, ENTER, EXIT, EXIT, ENTER and EXIT on the Remote Control in sequence and OSD will be locked. UNLOCK: Press ENTER, ENTER, EXIT, EXIT, ENTER and EXIT on the Remote Control in sequence and OSD will be Unlocked. OPERATING THE MONITOR 19 ENGLISH ADJUSTMENT MENU CONTENTS Image Settings Scheme Brightness Contrast Sharpness Saturation Hue Backlight 100 Image Settings User 50 50 12 ENGLISH Colour Temperature & Gamma Adjustment Item Problem / Option User Button to Press Displays a picture on a screen set by Image Settings adjustments. For sport environment. Scheme *2 Vivid Cinema Game Sport Brightness *1 Direct Direct Too dark Too bright Too dull Too intense Too soft Too sharp Too week Too strong Purplish Greenish Brightness of back light is reduced. Contrast Sharpness Saturation *2 Hue *2 Backlight Colour Temperature & Gamma Press Button. *1 Adjust the Brightness when you are using the monitor in a dark room and feel the screen is too bright. *2 Only COMP1, AV1 and s-v input. Direct You can skip the Menu items and display an adjustment scale directly by using the following button operations. Brightness: Press the BRIGHT Button (Remote Control) when the Menu is not displayed. Contrast: Press the CONTRAST Button (Remote Control) when the Menu is not displayed. 20 OPERATING THE MONITOR Image Settings Colour Temperature & Gamma Image Settings Gamma Colour Temerature Red Gain Green Gain Blue Gain Red Offset Green Offset Blue Offset 2. 2 User 256 256 256 0 0 0 Adjustment Item Gamma Off 2. 2 Problem / Option High contrast Normal Button to Press User 5000K Colour Temperature 6500K 7500K 9300K Red Gain To gain Red Go to adjustment menu of Gain and Offset. Greenish white Reddish white Yellowish white Bluish white Green Gain To gain Green Blue Gain To gain Blue Red Offset To offset Red Green Offset To offset Green Blue Offset To offset Blue OPERATING THE MONITOR 21 ENGLISH Display Settings Main Main Display Settings Aspect Ratio Zoom Auto Scan Select Source PIP PIP Mode PIP Position Aspect Ratio Side By Side Scale Auto Scan Select Source Full Screen Off Off Top-Left Full Screen ENGLISH Adjustment Item Problem / Option Full Screen Expansion display Button to Press Aspect Ratio Native Letter Box Pillar Box Displayed at the same magnification. [. . . ] If the blank screen saver is in active mode, touch the keyboard or the mouse. Increase the Contrast and/or Brightness. The Signal Cable is properly connected. The signal timing of the computer is within the specification of the monitor. [. . . ]