User manual IIYAMA PROLITE LH5563S

[. . . ] USER MANUAL ENGLISH Thank you very much for choosing the iiyama LCD monitor. We recommend that you take a few minutes to read this comprehensive manual carefully before installing and switching on the monitor. Please keep this manual in a safe place for your future reference. ENGLISH CE MARKING DECLARATION OF CONFORMITY This LCD monitor complies with the requirements of the EC Directive 2004/108/EC “EMC Directive” and 2006/95/EC “Low Voltage Directive”. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures. [. . . ] MULTI-TOUCH : ProLite TH5563MTS  This monitor complies with DDC2B of VESA standard. (Plug&play compliant) The MULTI-TOUCH function runs on Windows7 by connecting the monitor to DDC2B compliant computer with the USB cable supplied. MULTI-TOUCH support operation system : ProLite TH5563MTS  Microsoft Windows XP (64 bit and 32 bit) Microsoft Windows Vista (64 bit and 32 bit) Microsoft Windows 7 (64 bit and 32 bit) Mac OS X V10. 4 & above Linux (2. 6x) & above Not support Windows 2000 and earlier versions. Windows7*4 Windows7*5 Default mouse* Touch digitizer*2 Windows7 gestures*3 *1 Default mouse (click, drag, double-click and right-click) *2 Touch digitizer (click, drag /selection, double-click, right-click, flick and visual feedback) *3 Digitizer with Windows7 multi-touch gestures *4 Windows 7 - Starter and Home Basic version *5 Windows 7 - Home Premium, Professional, Enterprise and Ultimate versions 1 Vista XP Mac OSX Linux 18 BEFORE YOU OPERATE THE MONITOR OPERATING THE MONITOR To create the best picture, your iiyama LCD monitor has been preset at the factory with the COMPLIANT TIMING shown on page 36. You are also able to adjust the picture by following the button operation shown below. For more detailed adjustments, see page 27 for SCREEN ADJUSTMENTS. Press the MENU Button to start the On Screen Display feature. Menu items which can be switched by using the Picture Picture Mode Contrast Brightness Color Tint Sharpness Backlight ACR Color Temp. Input Resolution Standard 88 43 55 50 5 5 OFF 9300 K :Move Enter :Enter Exit :Exit or ENTER B Select the Menu item of the adjustment you want to make. Press the / Buttons to highlight the Buttons and enter the menu page. Use the C Press the appropriate adjustment or setting. / Buttons to make the D Press the EXIT Button to leave the menu, and the settings you just made would be automatically saved. For example, to correct for vertical position, select Menu item of Option. Use the Buttons to change the vertical position settings. The vertical position of the overall / display should be changing accordingly while you are doing this. Press the EXIT Button lastly, it ends, all changes are saved in the memory. Option Aspect ratio PIP Video Source Auto Adjustment Clock Frequency Phase H. Position V. Position Ambient Light Sensor Auto Detection Touch Feature Full OFF VGA 16 22 50 50 OFF OFF ON Exit :Exit :Move Enter :Enter NOTE The  MENU / EXIT Button can be used to return previous menu item. Any changes are automatically saved in the memory when the On Screen Display disappears.  Turning off the power should be avoided while using the Menu. Adjustments for Image Position, Clock Frequency and Phase are saved for each signal timing.  Except for these adjustments, all other adjustments have only one setting which applies to all signal timings. OPERATING THE MONITOR 19 ENGLISH [LOCK MODE] * Available for Back Controller only. Control Panel Button:  / buttons for about 5 seconds when Menu is not displayed, will lock/ Pressing and holding the unlock the Control Panel Button Lock function. Remote Control Function:  Pressing and holding the Menu and buttons for about 5 seconds when Menu is not displayed, will lock/unlock the Remote Control Lock function. OSD Menu Function:  Pressing and holding the / buttons for about 5 seconds when Menu is not displayed, will lock/ unlock the OSD Menu Lock function. Power On/Off Function:  Pressing and holding the Menu and buttons for about 5 seconds when Menu is not displayed, will lock/unlock the Power On/Off Lock function. ENGLISH [OPENING iiyama LOGO] * Available for Remote Control only. Pressing and holding the Enter button for about 3 seconds when Menu is not displayed, will lock/ unlock the Opening Logo function. 20 OPERATING THE MONITOR ADJUSTMENT MENU CONTENTS Picture Picture Picture Mode Contrast Brightness Color Tint Sharpness Backlight ACR Color Temp. Input Resolution Standard 88 43 55 50 5 5 OFF 9300 K :Move Enter :Enter Exit :Exit Adjustment Item Problem / Option Standard Button to Press For general windows environment and monitor default setting. Displays a picture on a screen set by Image Settings adjustments. Picture Mode*2 Vivid Cinema User Contrast Brightness*1 Too dull Too intense Too dark Too bright Too week Too strong Purplish Greenish Too soft Too sharp Brightness of back light is reduced. [. . . ] Increase the Contrast and/or Brightness. The  Signal Cable is properly connected. The  signal timing of the computer is within the specification of the monitor. If the monitor is in power management mode, touch the keyboard or the mouse. [. . . ]