User manual IIYAMA PROLITE T6560MTS

[. . . ] USER MANUAL ENGLISH Thank you very much for choosing the iiyama LCD monitor. We recommend that you take a few minutes to read this comprehensive manual carefully before installing and switching on the monitor. Please keep this manual in a safe place for your future reference. ENGLISH CE MARKING DECLARATION OF CONFORMITY This LCD monitor complies with the requirements of the EC Directive 2004/108/EC "EMC Directive" and 2006/95/EC "Low Voltage Directive" and 2009/125/EC "ErP Directive". In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures. [. . . ] You are also able to adjust the picture by following the button operation shown below. For more detailed adjustments, see page 32 for SCREEN ADJUSTMENTS. Press the MENU Button to start the On Screen Display feature. Menu items which can be switched by using the Image Settings Scheme Brightness Contrast Sharpness Saturation Hue Backlight Colour Temperature & Gamma 100 User 50 50 12 or ENTER B Select the Menu item of the adjustment you want to make. Press the / Buttons to highlight the Buttons and enter the menu page. Use the C Press the appropriate adjustment or setting. / Buttons to make the D Press the EXIT Button to leave the menu, and the settings you just made would be automatically saved. For example, to correct for vertical position, select Menu item of Advanced Settings. Then, select Image Position by using the Buttons. Use the Buttons to change the vertical position settings. The vertical position of the overall / display should be changing accordingly while you are doing this. Press the EXIT Button lastly, it ends, any changes are saved in the memory. Advanced Setting Auto Adjustment Image Position Phase Clock Flesh Tone Power LED IRFM Baud Rate Monitor ID Light Sensor Factory Reset VGA ADC Settings Off On Off 115200 1 Off No 46 50 No Image Position 0 0 NOTE The MENU Button can be used to return previous menu item. When button operations are aborted during adjustment, On-Screen Display disappears when the time set for the OSD Timeout has passed. EXIT button can be used to return previous menu item. Any changes are automatically saved in the memory when the On Screen Display disappears. Turning off the power should be avoided while using the Menu. Adjustments for Image Position, Clock and Phase are saved for each signal timing. Except for these adjustments, all other adjustments have only one setting which applies to all signal timings. OPERATING THE MONITOR 19 ENGLISH OSD LOCK MODE: LOCK: Press ENTER, ENTER, EXIT, EXIT, ENTER and EXIT on the Remote Control in sequence and OSD will be locked. UNLOCK: Press ENTER, ENTER, EXIT, EXIT, ENTER and EXIT on the Remote Control in sequence and OSD will be Unlocked. ENGLISH 20 OPERATING THE MONITOR ADJUSTMENT MENU CONTENTS Image Settings Scheme Brightness Contrast Sharpness Saturation Hue Backlight Colour Temperature & Gamma 100 Image Settings User 50 50 12 Adjustment Item Problem / Option User Button to Press Displays a picture on a screen set by Image Settings adjustments. For sport environment. Scheme *2 Vivid Cinema Game Sport Brightness *1 Direct Direct Too dark Too bright Too dull Too intense Too soft Too sharp Too week Too strong Purplish Greenish Brightness of back light is reduced. Contrast Sharpness Saturation *2 Hue *2 Backlight Colour Temperature & Gamma Press Button. *1 Adjust the Brightness when you are using the monitor in a dark room and feel the screen is too bright. *2 Only COMP1, AV1 and s-v input. Direct You can skip the Menu items and display an adjustment scale directly by using the following button operations. Brightness: Press the BRIGHT Button (Remote Control) when the Menu is not displayed. Contrast: Press the CONTRAST Button (Remote Control) when the Menu is not displayed. OPERATING THE MONITOR 21 ENGLISH Image Settings Colour Temperature & Gamma Image Settings Gamma Colour Temerature Red Gain Green Gain Blue Gain Red Offset Green Offset Blue Offset 2. 2 User 256 256 256 0 0 0 ENGLISH Adjustment Item Gamma Off 2. 2 Problem / Option High contrast Normal Button to Press User 5000K Colour Temperature 6500K 7500K 9300K Red Gain To gain Red Go to adjustment menu of Gain and Offset. [. . . ] Problem Check The Power Cable is firmly seated in the socket. Please check with another piece of equipment. If the blank screen saver is in active mode, touch the keyboard or the mouse. Increase the Contrast and/or Brightness. [. . . ]