User manual IMATION DEFENDER H200 PLUS BIO

[. . . ] After you plug in a new device, you must personalize it before you can use the authentication and private partition features. The device uses pre-installed ACCESS Standard software to guide you through the personalization process. The personalization wizard starts automatically when you plug in a new (or recycled) device. If autorun is not configured for your computer, you can start ACCESS Standard from the application partition on the device. PLUGGING IN THE DEVICE Depending on the power supplied by the host computer, you may require one or two USB connectors to use DefenderTM H200+Bio. [. . . ] For more information about the personalization process, see the ACCESS Standard User Guide. Note 2: After you successfully complete the personalization process, you can access your private partition using a file manager. For more information about logging in and saving files to or opening files from the private partition, see "Accessing data on the device" on page 7. 6 ACCESSING DATA ON THE DEVICE After you personalize a device, only registered users can authenticate to it. Authentication involves logging into the device using a password, fingerprint, or both. The authentication method you use depends on the capabilities of the device and the profile applied to the device. After you successfully log in, you can save files to, and open files from, your private partition. It is recommended that you log out of your device if you must leave it connected while you are away from your computer. Otherwise, another user could access your private partition while you are absent. You can also disconnect the device completely to bring the data with you. This chapter provides information about the following topics: · Logging into and out of the device · Saving and opening files · Disconnecting the device LOGGING INTO AND OUT OF THE DEVICE To log into the device 1. From the notification area, at the far right of the taskbar, right-click the Defender icon and click Login. If you are using a computer running Mac OS X, open a file manager and click the application drive for the device. Double-click the ACCESS Standard application and on the main page of ACCESS Standard, under Manage Device, click Login. Follow the prompts in the authentication wizard until the device successfully authenticates you. 3. Tip: If your device uses only biometric authentication, you can log into it without starting ACCESS Standard by swiping your finger across the fingerprint sensor. From the notification area, at the far right of the taskbar, right-click the Defender icon and click Logout. If you are using a computer running Mac OS X, open a file manager and click the application drive for the device. Double-click the ACCESS Standard application and on the main page of ACCESS Standard, under Manage Device, click Logout. Tip: You can also log out of your device by right-clicking the Defender icon, and then clicking Eject Device. 7 ACCESSING DATA ON THE DEVICE cont. SAVING AND OPENING FILES When you plug in your device both the application drive and the private partition display in a file manager, such as Windows® Explorer, with an associated drive letter for each partition. Application drive Private partition Once you log into the device, you can open files on your private partition using the appropriate program or a file manager. When you save data to your private partition, the device encrypts the data using hardware-based AES 256-bit encryption. Data is automatically decrypted when you open the file. Note: You cannot save data to the application partition. DISCONNECTING THE DEVICE To disconnect the device · From the notification area at the far right of the taskbar, right-click the Defender icon and click Eject Device. Tip: You can also disconnect the device by clicking the Safely Remove Hardware icon in the notification area at the far right of the taskbar. Click the message "Safely remove USB Mass Storage Device - Drive (F:); where F is the letter of the drive in the file manager that is associated with the device. Disconnect the device when the following message displays, "The USB Mass Storage Device can now be safely removed from the system". [. . . ] The following information applies to only EU-member states: The equipment that you bought required the extraction and use of natural resources for its production. It may contain hazardous substances that could impact human health and the environment. The crossed-out wheeled bin symbol indicates that this product may not be treated as household waste. By disposing of this product using the appropriate take-back systems, you will help prevent the spread of hazardous substances to our environment and reduce the impact on natural resources. [. . . ]