User manual IMATION DRIVE MANAGER REV 02

[. . . ] (The programs named Imation Drive manager. If your account does not have Administrator rights, please contact your system administrator for assistance. In rare cases, when you re-start the computer and find your Flash Drive in Unlocked mode (have the right to access Security Area), please unplug the USB 2. 0 Flash Drive and then plug back in, to make sure it is back to accessing the Public Area. If you experience trouble with the operation of the software of your drive, please check our web site at www. imation. com/flash and click on support and downloads to see if there are any updates or FAQ's that address your situation. Rev002 P4 of 11 Drive Partitions and Security Function The Imation USB Flash Drive includes a utility program named "Imation Drive Manager. exe" to enable the user to partition the Flash Drive and/or to set Security Area with a password check to secure your personal data. [. . . ] All previous data stored on the drive will be lost once this program starts. 7. 9. CLOSEClick this button to exit the program. PARTITION: Click the partition tab to switch to the PARTITION function. SECURITY: Click the security tab to switch to the SECURITY function. Not functional on this flash drive. 10. CONFIGURATION: Note 1: Only after enabling the PASSWORD option in Security Function, can the Capacity Slider Bar be dragged. Otherwise, the size of Security Area is set to zero. Rev002 P6 of 11 Security Function 11 11 11. PASSWORD: After enabling the password option, the display windows of 12, 13 and 14 become valid to edit as shown in the following. After filling in the password information, the capacity of the Security Area will be allowed to be set in the PARTITION function. In other words, if this option is not enabled, users are not allowed to set the capacity of the Security Area i. e. no Security Area. 12 12 13 13 14 14 Rev002 P7 of 11 12. Enter Password: Users can set the password for Security Area. User can key in a minimum of 6 characters to use as a password (16 characters maximum). Verify Password: Type the password again as verification. Hint: The optional Hint area is used to remind authorized users of the password. Note: Since this hint will be visible to anyone that gains access to the drive, care should be taken to make the hint usable only to authorized personnel and not assist an unauthorized individual from guessing the password. . For improved security, leave the optional hint area blank. Configuration Function Is not available on this Imation flash drive. Note 1: Users are asked to re-plugin the USB Flash Drive after Imation Drive Manager. exe is finished to activate these selected functions. Note 2: If Security Function is enabled, the login program (Login. exe) for security function will be loaded into the USB Flash Drive. Otherwise, Login. exe will not be generated. Login. exe Login. exe Interface Once the Security The "Login. exe" is the interface for access t o the Security Area. Area has been implemented, users can run "Login. exe" to unlock and access the Security Area. Once all the data processing has completed, users then select "Locked" to secure their personal data in the Security Area. To run the "Lock. exe", just double click the file shown below. Login. exe Note: Please notice that "Login. exe" is the only interface to access to Security Area if you have set it. Without this program, you won't be able to access the Security Area. If you have deleted "Login. exe", you can get the Imation Drive Manager. exe software from the Imation Web site. [. . . ] Verify Password: Re-type the new password. A password hint can be placed in the hint box. Be careful not to allow this hint to help an unauthorized user guess the password. Using the hint box is optional. Note 1: When executing Login. exe, users can find its icon in the system tray menu bar shown as below, typically located in the bottom right corner of the screen. [. . . ]