User manual IMATION LOCK

[. . . ] Configure Partition Sizes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Checking the Security Application Program ­ LOCK's Version . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Running the Program As Privileged User . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 FAQ ­ Frequently Asked Questions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] (f) Multi Language Support ­ supports English, Japanese, Simplify Chinese, Traditional Chinese language interface, will auto detect the language used by operating system. Default interface is set to English. D. Before Using the Security Application Program ­ Imation LOCK Imation Data Storage and Information Management Document No. : M0-001-1408-8 Effective: 25-Sep-2006 Version: B Page: -3- Upon plugging the device into a USB port, your operating system should recognize the device and display a "Removable Disk" icon. This is the "Public" partition. The security application program ­ Imation LOCK will be stored in this area as well as the "Secure" partition area. Partition 1 ­ Secure Area The secure area is password protected and can be accessed by typing in the correct password only. If NO password exists, you can view either of the 2 partitions, but no partition is secure. Secure Partition Partition 2 ­ Public Area This area is "Always Open" to all users using the device. Users can read / write data to this area any time. The security application program ­ Imation LOCK is resident in this partition. Password security will only apply to the secure partition and will not affect this partition. Public Partition Imation Data Storage and Information Management Document No. : M0-001-1408-8 Effective: 25-Sep-2006 Version: B Page: -4- E. Main Screen About Set Password Disable Password Password Hint Configure size Log Out Move the mouse cursor over the icons, and the description of the button will appear within seconds. Set Password / Change Password Press the top right hand button to setup or change your password. Imation Data Storage and Information Management Document No. : M0-001-1408-8 Effective: 25-Sep-2006 Version: B Page: -5- Setup Password : If no password exist, simply enter a password of your choice up to 16 characters in length. You may also enter a password hint (maximum 32 characters including spaces) to remind you of your password in the event that you forget it. Note: You can only type in English letters and numbers. Click the "Show Password" box to view what you are typing. (apply) to save the password and password hint. You will When ready, press see the following messages telling you that the password has been changed. At this point the device will be locked automatically when you remove it from the USB port or if there is a suspension in power. Press (cancel) to cancel the set up procedure if you do not wish to save the Imation Data Storage and Information Management Document No. : M0-001-1408-8 Effective: 25-Sep-2006 Version: B Page: -6- password and password hint. Change Password : If a password exists, before you make any changes you will need to enter the current password. Enter the current password, and new password of your choice. You may also edit the password hint at the same time. Click the "Show Password" box if you want to see what you are typing. Press (apply) to save changes to the password and password hint. You will see the following messages telling you that the password has been changed. At this point the device will be locked automatically when you remove it from the USB port or if there is a suspension in power. (cancel) to cancel the change password procedure if you want to keep Press current password and password hint. Imation Data Storage and Information Management Document No. : M0-001-1408-8 Effective: 25-Sep-2006 Version: B Page: -7- E3. Disable Password Press the middle button on the right to "Disable" (remove) the password. [. . . ] Secure partition Before Configure Size NB : After Configure Size After configuring (resizing) is completed all data will be erased. The security application program will be restored in the public area automatically. F. Checking the Security Application Program ­ LOCK's Version It will be necessary to know the revision number if you need to upgrade to a newer version of the software or if you are having trouble using the software and need help from our technical staff. Simply press the top left hand button and the version will be displayed. Imation Data Storage and Information Management Document No. : M0-001-1408-8 Effective: 25-Sep-2006 Version: B Page: - 14 - G. [. . . ]