User manual INDESIT B339NFP

[. . . ] Fridge-freezer combined Instructions for installation and use B 339 NF P GB Fridge-freezer Combined Instructions for installation and use To maintain the EFFICIENCY and SAFETY of this appliance, we recommend: - use only the MANUFACTURER Service - use only ORIGINAL Spare Parts Safety - a good habit to get into. ATTENTION Read your manual carefully since it contains instructions which will ensure safe installation, use and maintenance of your appliance. Your Refrigerator is built to International safety standards (EN60) ans has been awarded the European approval mark (IMQ) for compliance with UK electrical safety requirements. It also meets the EC standards on the prevention and elimination of readio interference (EC directive 87/308 - 02. 06. 89). This appliance is designed to be used indoors and under no circumstances should it be installed outside even if protected by a roof. [. . . ] Place the food that you wish to freeze in the top compartment "M" where the temperature will fall below -18°C, which is ideal for freezing food properly. Remember that proper conservation depends on the speed of freezing. The maximum amount of food you can freeze per day is indicated on the data plate situated inside the refrigerator compartment. The first time, or after the freezer has been inactive, you can only freeze food after having let the appliance function at maximum and the red lamp "B" has come off. When the appliance is already on, freezing can be done in two ways: 1. for small quantities, less than the maximum capacity indicated on the data plate, just press the freezing button "F" (yellow lamp "D" lit) and insert the food to be frozen. After 24 hours, or once the optimum temperatures have been reached, the rapid freezing function will switch itself off automatically (yellow lamp "D" off). For large quantities of food to be frozen (up until the maximum load indicated on the data plate), keep the freezing button "F" pressed down until the yellow lamp starts flashing quickly. After 24 hours, the yellow lamp will stop flashing (permanently lit); you can now insert the food to be frozen. After 24 hours, the button will switch itself off automatically (yellow lamp off). During the freezing process, avoid opening the door of the freezer. In order to freeze and then thaw foods optimally, it is recommended that you divide food into small portions so that they freeze quickly and uniformly. The packages should be clearly marked with the content and the date they were frozen. In order to obtain a larger amount of space in the freezer compartment, you can remove the central drawer, and place the food directly onto the evaporator plate. Make sure that, after having inserted the load, the door closes correctly. Do not open the freezer door in the event of a power failure or malfunction. This precaution will slow the rise in temperature within the compartment. If the door is not opened, frozen and fast-frozen foods will remain in their current state for approximately 9-14 hours. Do not place full bottles in the freezer: they could easily burst because all liquids increase in volume when they freeze. Ice trays This new concept of ice trays is an exclusive patent. The fact that they are situated on the inner door of the freezer compartment ensures greater ergonomics and cleanliness: the ice no longer comes into contact with the food placed inside the freezer compartment; furthermore, the dripping of the water during filling is avoided (a lid to cover up the hole after filling with water is also provided). 3) Fill up the tray with water via the special hole up to the level indicated (MAX WATER LEVEL), taking care not to exceed it: inserting more water than is necessary will lead to the formation of ice which could obstruct the exit of the ice cubes. If you have used an excessive amount of water, you will have to wait until the ice has melted, empty out the tray and re-fill it with water. [. . . ] If you own a dishwasher, you may wash these parts in the dishwasher. Remember to dry thoroughly before replacing them. Dust may deposit on the back panel and affect the proper running of the appliance. To remove dust, vacuum away the dust very carefully using the appropriate vacuum cleaner accessory. [. . . ]