User manual INDESIT BIAA13FWD

[. . . ] - The appliance has been used for normal domestic purposes only. - The appliance has not been altered, serviced, maintained, dismantled, or otherwise interfered with by any person not authorised by us. - Any repair work must be undertaken by us or our appointed agent. - Any parts removed during repair work or any appliance that is replaced become our property. [. . . ] - Connect Brown wire to terminal marked ‘L’ or coloured red or brown. - Connect Blue wire to terminal marked ‘N’ or coloured Black or Blue. If a 13amp plug (BS 1363) is used it must be fitted with a 13amp fuse. If you are in any doubt about the electrical supply to your machine, consult a qualified electrician before use. CE Marking certifies that this appliance conforms to the following EEC directives: Low Voltage Equipment - 73/23/EEC & 93/68 EEC Electromagnetic Compatibility 89/336/EEC, 92/31/EEC & 93/68/EEC PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR 5 YEAR PARTS GUARANTEE ON 08448 24 24 24 5 GB Start-up and use Starting the appliance !Before starting the appliance, follow the installation instructions (see Installation). Before connecting the appliance, clean the compartments and accessories well with lukewarm water and bicarbonate. The appliance comes with a motor protection control system which makes the compressor start approximately 8 minutes after being switched on. The compressor also starts each time the power supply is cut off whether voluntarily or involuntarily (blackout). 1. Insert the plug into the socket and ensure that the internal light illuminates ( the FREEZER OPERATION knob must not be on the position ) . 2. Turn the FREEZER OPERATION knob and REFRIGERATOR OPERATION knob to an average value. To maximise space inside the freezer, all drawers [with the exception 6 of the bottom drawer] can be removed from their positions and the food placed directly on the racks/glass shelves supplied [where present]. 5 7 6 5 Once cleaning operations have been completed, screw the valve back on while ensuring that the internal seal adheres to the 1 4 end part of the tank bushing; subsequently, put the tank-valve assembly back into the appropriate cylindrical housing of the 2 door, while making sure that the upper hook on the rear wall of the tank is properly inserted in the appropriate compartment on the inner wall of the door. Put the previously removed ledges and tank cover back in place. Make sure that the tank has been properly inserted in the door (see picture). PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR 5 YEAR PARTS GUARANTEE ON 08448 24 24 24 7 GB Ice3 ice tray The fact that they are situated on the top part of the freezer drawers ensures greater cleanliness: the ice no longer comes into contact with the food placed inside the freezer compartment; furthermore, the dripping of the water during filling is avoided (a lid to cover up the hole after filling with water is also provided). Check that the tray is ompletely empty and fill it with water through the opening provided. 2. Take care not to exceed the level indicated (MAX WATER LEVEL). Excess water prevents the ice cubes from dispensing (if this happens, wait for the ice to melt and empty the tray). 3. Turn the tray 90°: due to the connected compartments each mould fills with water (see diagram). 4. Close the opening with the lid provided and put the tray back, placing the top part in the corresponding housing and allowing it to drop in again. 5. When the ice has formed (minimum time approximately 8 hours) knock the tray against a hard surface and wet the outside so that the ice cubes come loose and take them out through the opening. Replacing the light bulb • We recommend you clean your fridge with our Professional Fridge cleaner. To order please call us on 08448 225 225 or visit www. indesitservice. co. uk To replace the light bulb in the refrigerator compartment, pull out the plug from the electrical socket. Access the light bulb by removing the cover as indicated in the diagram. [. . . ] Consumers should contact their local authority or retailer for information concerning the correct disposal of their old appliance. • The internal refrigerant makes a slight noise even when the compressor is off. Some of the external parts of the refrigerator become hot. • These raised temperatures are necessary in order to avoid the formation of condensation on certain parts of the product. Don’t forget should our advice fail to resolve the problem with your appliance please call us on 08448 224 224 to arrange an engineer visit. [. . . ]