User manual INDESIT BWE 61252 W FR

[. . . ] Raccordement du tuyau de vidange Raccorder le tuyau d’évacuation, sans le plier, à un conduit d’évacuation ou à une évacuation murale placés à une distance du sol comprise entre 65 et 100 cm ; ou bien l’accrocher à un évier ou à une baignoire, dans ce cas, fixer le support en plastique fourni avec l’appareil au robinet (voir figure). 14 Instructions for use WASHING MACHINE Contents GB English GB Installation, 16-17 Unpacking and levelling Connecting the electricity and water supplies The first wash cycle Technical data Care and maintenance, 18 Cutting off the water and electricity supplies Cleaning the washing machine Cleaning the detergent dispenser drawer Caring for the door and drum of your appliance Cleaning the pump Checking the water inlet hose Precautions and tips, 19 General safety Disposal Opening the porthole door manually BWE 61252 Description of the washing machine, 20-21 Control panel Display Running a wash cycle, 22 Wash cycles and options, 23-24 Table of wash cycles Wash options Push & Wash Detergents and laundry, 25-26 Detergent dispenser drawer Preparing the laundry Special wash cycles Load balancing system Troubleshooting, 27 Service, 28 15 Installation GB !This instruction manual should be kept in a safe place for future reference. If the washing machine is sold, transferred or moved, make sure that the instruction manual remains with the machine so that the new owner is able to familiarise himself/ herself with its operation and features. [. . . ] Use the WASH CYCLE SELECTOR knob to select the desired wash cycle. A temperature and spin speed is set for each wash cycle; these values may be adjusted. The duration of the cycle will appear on the display. Use the relevant buttons: Modify the temperature and/or spin speed. The machine automatically displays the maximum temperature and spin speed values set for the selected cycle, or the most recently-used settings if they are compatible with the selected cycle. The 40° temperature can be decreased by pressing the 60° button, until the cold wash “OFF” setting is reached. The spin speed may be progressively reduced by pressing the button, until it is completely excluded (the “OFF” setting). If these buttons are pressed again, the maximum values are restored. Exception: if the 6 programme is selected, the temperature can be increased up to a value of 60°C. Exception: if the 7 programme is selected, the temperature can be increased up to a value of 60°C. Exception: if the 10 programme is selected, the temperature can be increased up to a value of 90°C. 40° 60° Setting a delayed start. To set a delayed start for the selected cycle, press the corresponding button repeatedly until the required delay period has been reached. When this option has been activated, the symbol lights up on the display. To remove the delayed start setting, press the button until the text “OFF” appears on the display. € Press the button to enable the option; the indicator light corresponding to the button will switch on. € Press the button again to disable the option; the indicator light will switch off. If the selected option is not compatible with the set wash cycle, the indicator light will flash and the option will not be activated. If the selected option is not compatible with another previously selected option, the indicator light will flash accompanied by a buzzer (3 beeps), and only the latter option will be activated; the indicator light corresponding to the activated option will turn on. The options may affect the recommended load value and/or the duration of the cycle. The corresponding indicator light will turn green, remaining lit in a fixed manner, and the door will be locked (the DOOR LOCKED symbol will be lit). To change a wash cycle while it is in progress, pause the washing machine using the START/PAUSE button (the START/PAUSE indicator light will flash slowly in an amber colour); then select the desired cycle and press the START/PAUSE button again. [. . . ] • The START/PAUSE button has not been pressed. The washing machine continuously takes in and drains water. € The drain hose is not fitted at a height between 65 and 100 cm from the floor (see “Installation”). € The free end of the hose is under water (see “Installation”). [. . . ]